Behringer 1202FX 5. Specifications, Line input, Mono inputs, Stereo inputs, EQ mono channels, Microphone inputs, Frequency response

ENGLISH

14

strain relief clamp

sleeve ring tip

sleeve ground/shield

ring

cold (-ve)

tip

hot (+ve)

For connection of balanced and unbalanced plugs, ring and sleeve have to be bridged at the stereo plug.

Balanced ¼" TRS connector

Fig. 4.3: ¼"stereo plug

strain relief clamp

sleeve ring tip

sleeve ground/shield

ring

right signal

tip

left signal

¼" TRS headphones connector

Fig. 4.4: Stereo plug for headphones connection

			XENYX 1002FX/1202FX User Manual
5. Specifications
Mono inputs
	Microphone inputs
		Type	XLR, electronically balanced,
			discrete input circuit
		Mic E.I.N. (20 Hz - 20 kHz)
		@ 0 Ω source resistance	-132.7 dB / 137 dB A-weighted
		@ 50 Ω source resistance	-130 dB / 133.9 dB A-weighted
		@ 150 Ω source resistance	-127.1 dB / 130.9 dB A-weighted
		Frequency response	<10 Hz - 200 kHz (-1 dB)
		Gain range	+10 to +60 dB
		Max. input level	+12 dBu @ +10 dB gain
		Impedance	approx. 2.6 kΩ balanced
		Signal-to-noise ratio	-107 dB / -111 dB A-weighted
			(0 dBu In @ +22 dB gain)
		Distortion (THD+N)	0.005% / 0.003% A-weighted
	Line input
		Type	¼" TRS connector electronically
		balanced
		Impedance	approx. 20 kΩ balanced
			10 kΩ unbalanced
		Gain range	10 to +40 dB
		Max. input level	+20 dBu @ 0 dB Gain
	Fade-out attenuation1 (Crosstalk attenuation)
		Main fader closed	85 dB
		Channel fader closed	88 dB
	Frequency response
		Microphone input to main out
		<10 Hz - 80 kHz	+0 dB / -1 dB
		<10 Hz - 137 kHz	+0 dB / -3 dB
	Stereo inputs
		Type	¼" TRS connector, electronically
			balanced
		Impedance	approx. 20 kΩ bal. / 10kΩ unbal.
			(+4 dBu operating level)
			approx. 20 kΩ bal. / 5kΩ unbal.
			(-10 dBV)
		Max. input level	+22 dBu
	EQ mono channels
		Low	80 Hz /	±15 dB
		Mid	2.5 kHz	/ ±15 dB
		High	12 kHz	/ ±15 dB