
ENGLISH
2 | XENYX 1204/1204FX User Manual |
|
Important Safety Instructions
*
Terminals marked with this symbol carry electrical current of sufficient magnitude to constitute risk of electric shock. Use only
*
This symbol, wherever it appears, alerts you to the presence of uninsulated dangerous voltage inside the enclosure - voltage that may be sufficient to constitute a risk of shock.
!
This symbol, wherever it appears, alerts you to important operating and maintenance instructions in the accompanying literature. Please read the manual.
!Caution
To reduce the risk of electric shock, do not remove the top cover (or the rear section). No user serviceable parts inside. Refer servicing to qualified personnel.
!Caution
To reduce the risk of fire or electric shock, do not expose this appliance to rain and moisture. The apparatus shall not be exposed to dripping or splashing liquids and no objects filled with liquids, such as vases, shall be placed on the apparatus.
!Caution
These service instructions are for use by qualified service personnel only. To reduce the risk of electric shock do not perform any servicing other than that contained in the operation instructions. Repairs have to be performed by qualified service personnel.
[1]Read these instructions.[2]Keep these instructions.[3]Heed all warnings.[4]Follow all instructions.[7]Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
[8]Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
[9]Do not defeat the safety purpose of the polarized or grounding- type plug. A polarized plug has two blades with one wider than the other. A
a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
[10]Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
[11]Use only attachments/accessories specified by the manufacturer.
[12]Use only with the cart, stand, tripod, bracket,or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from
[14]Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
[15]The apparatus shall be connected to a MAINS socket outlet with a protective earthing connection.
[16]Where the MAINS plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable.
1. Introduction
The microphone channels feature
•130 dB dynamic range for an incredible amount of headroom
•A bandwidth ranging from below 10 Hz to over 200 kHz for
•The extremely
•They are perfectly matched to every conceivable microphone with up to 60 dB gain and +48 volt phantom power supply
•They enable you to use the greatly extended dynamic range of your
The equalizers used for the XENYX Series are based on the legendary circuitry of
Additionally, your XENYX mixing console has an effects processor with
The XENYX mixing consoles are equipped with a state-
The USB interface supplied with the unit is a perfect match for the XENYX Series and serves as a powerful recording interface to your PC or MAC. It supports the digital transmission of signals on up to four channels with max. 48 kHz and extremely low latency. When wired to the CD/TAPE INPUT and OUTPUT connectors, the interface transfers the stereo mix from the console directly to a computer. Both the recording signal and the playback signal from the computer can be monitored at the same time.
In this way, you can use several recording runs to produce complete
3
!!CAUTION!
◊We should like to draw your attention to the fact that extreme volumes may damage your hearing and/or your headphones or loudspeakers. Turn the MAIN MIX faders and phones control in the main section fully down before you switch on the unit. Always be careful to set the appropriate volume.
1.1 General mixing console functions
A mixing console fulfils three main functions:•Signal processing: Preamplification, level adjustment, mixing of effects, frequency equalization.
•Signal distribution: Summing of signals to the aux sends for effects processing and monitor mix, distribution to one or several recording tracks, power amp(s), control room and
•Mix: Setting the volume level, frequency distribution and positioning of the individual signals in the stereo field, level control of the total mix to match the recording devices/crossover/power amplifier(s). All other mixer functions can be included in this main function.
The interface of BEHRINGER mixing consoles is optimized for these tasks enabling you to easily keep track of the signal path.
1.2 The user’s manual
The user’s manual is designed to give you both an overview of the controls, as well as detailed information on how to use them. In order to help you understand the links between the controls, we have arranged them in groups according to their function. If you need to know more about specific issues, please visit our website at http://www.behringer.com, where you’ll find explanations of e.g. effects and dynamics applications.
◊The block diagram supplied with the mixing console gives you an overview of the connections between the inputs and outputs, as well as the associated switches and controls.
For the moment, just try and trace the signal path from the microphone input to the aux send 1 connector. Don’t be put off by the huge range of possibilities; it’s easier than you think! If you look at the overview of the controls at the same time, you’ll be able to quickly familiarize yourself with your mixing console and you’ll soon be making the most of all its many possibilities.
ENGLISH