Behringer 1222FX XENYX 1222FX

12

XENYX 1222FX

+Connect microphones before you switch on the

phantom power supply. Please do not connect

microphones to the mixer (or the stagebox/

wallbox) while the phantom power supply is

switched on. In addition, the monitor/PA

loudspeakers should be muted before you activate

the phantom power supply. After switching on,

wait approx. one minute to allow for system

stabilization.

+Caution! You must never use unbalanced XLR

connectors (PIN 1 and 3 connected) on the MIC

input connectors if you want to use the phantom

power supply.

SERIAL NUMBER

Please note the important information on the serial number

given in chapter 1.3.3.

3. DIGITAL EFFECTS PROCESSOR

AND XPQ SURROUND FUNCTION

3.1 Digital effects processor

Contents

Main XENYX 1222FX IMPORTANT SAFETY INSTRUCTIONS 1222FX XENYX 1. INTRODUCTION FOREWORD TABLE OF CONTENTS 1. INTRODUCTION 1. INTRODUCTION ......................................................... 4 2. CONTROL ELEMENTS AND CONNECTORS .............. 6 + 1. INTRODUCTION 1.1 General mixing console functions 1.2 The users manual + 1.3 Before you get started 1.3.1 Shipment + 1.3.2 Initial operation + 1.3.3 Online registration 2. CONTROL ELEMENTS AND CONNECTORS 2.1 Mono channels 2.1.1 Microphone and line inputs + 2.1.2 Equalizer 2.1.3 Aux sends (MON and FX) + 2.1.4 Pan, mute switch and channel fader + 2.2 Stereo channels 2.3.1 Monitor send and FX send channels 2.2.1 Channel inputs 2.2.2 Equalizer stereo channels + 2.3.3 Aux return connectors + 2.3.4 CD/tape return channel, voice canceller and connection socket 2.3.5 Main mix, main out connectors and headphone connector CAUTION! + 2.3.6 Level meter and level setting + 2.4 Graphic 7-band equalizer + 2.5 Rear view of 1222FX XENYX 1222FX + 3.1 Digital effects processor + 3. DIGITAL EFFECTS PROCESSOR AND XPQ SURROUND FUNCTION + 5. SPECIFICATIONS 5. SPECIFICATIONS 6. WARRANTY 6. WARRANTY