XENYX 502

1.Specifications

Mono inputs
Microphone inputs (XENYX Mic preamp)

Type

XLR connector, electronically balanced,

 

discrete input circuit

Mic E.I.N.1(20 Hz - 20 kHz)

@ 0 Ω source resistance

-134 dB / 135.7 dB A-weighted

@ 50 Ω source resistance

-131 dB / 133.3 dB A-weighted

@ 150 Ω source resistance

-129 dB / 130.5 dB A-weighted

Frequency response

<10 Hz - 150 kHz

-1 dB

<10 Hz - 200 kHz

-3 dB

Gain range

+10 dB to +60 dB

Max. input level

+12 dBu @ +10 dB GAIN

Impedance

approx. 2.6 kΩ balanced

Signal-to-noise ratio

110 dB / 112 dB A-weighted (0 dBu In @

 

+22 dB GAIN)

Distortion (THD+N)

0.005 % / 0.004 % A-weighted

Line input

Type

¼" TRS jack, electronically balanced

Impedance

approx. 20 kΩ balanced, approx. 10 kΩ

 

unbalanced

Gain range

-10 dB to +40 dB

Max. input level

+22 dBu @ 0 dB GAIN

Fade-out attenuation2(Crosstalk attenuation)

Main fader closed

90 dB

Channel muted

89.5 dB

Channel fader muted

89 dB

Frequency response (Mic In → Main Out)

<10

Hz - 90 kHz

+0 dB / -1 dB

<10

Hz - 160 kHz

+0 dB / -3 dB

Stereo inputs

Type

¼" TRS jack, electronically balanced

Impedance

approx. 20 kΩ

Max. input level

+22 dBu

Equalizer
EQ mono channels

LOW

80 Hz / ±15 dB

MID

2.5 kHz / ±15 dB

HIGH

12 kHz / ±15 dB

EQ stereo channels

LOW

80 Hz / ±15 dB

MID

2.5 kHz / ±15 dB

HIGH

12 kHz / ±15 dB

Send / Return
Aux sends

Type

¼" TS jack, unbalanced

Impedance

approx. 120 Ω

Max. output level

+22 dBu

Stereo aux returns

Type

¼" TRS jack, electronically balanced

Impedance

approx. 20 kΩ balanced / approx. 10 kΩ

 

unbalanced

Max. input level

+22 dBu

Outputs
Main outputs

Type

¼" TRS jack, unbalanced

Impedance

approx. 120 Ω unbalanced

Max. output level

+22 dBu

Control room outputs

Type

¼" TS jack, unbalanced

Impedance

approx. 120 Ω

Max. output level

+22 dBu

Headphones output

Type

¼" TRS jack, unbalanced

Max. output level

+19 dBu / 150 Ω (+25 dBm)

Main mix system data3(Noise)

Main mix @ -∞, channel fader @ -∞

-106 dB / -109 dB A-weighted

Main mix @ 0 dB, channel fader @ -∞

-95 dB / -98 dB A-weighted

Main mix @ 0 dB, channel fader @ 0 dB

-84 dB / -87 dB A-weighted

Power supply
Physical/weight

Dimensions (H x W x D)

1.9" / 1.5" x 5.3" x 7"

 

(47 mm / 37 mm x 134 mm x 177 mm)

Weight (net)

1.2 lbs (0.55 kg)

1Equivalent Input Noise

2Measuring conditions: 1 kHz rel. to 0 dBu; 20 Hz - 20 kHz; line input; main output; unity gain.

320 Hz - 20 kHz; measured at main output. Channels 1 - 4 unity gain; EQ flat; all chan- nels on main mix; channels 1/3 as far left as possible; channels 2/4 as far right as possible; reference = +6 dBu.

BEHRINGER is constantly striving to maintain the highest professional standards. As a result of these efforts, modifications may be made from time to time to existing products without prior notice. Specifications and appearance may differ from those listed or illustrated.

Technical specifications and appearance are subject to change without notice. The information contained herein is correct at the time of printing. BEH- RINGER accepts no liability for any loss which may be suffered by any person who relies either wholly or in part upon any description, photograph or statement contained herein. Colors and specifications may vary slightly from product. Our Products are sold through authorized dealers only. Distributors and dealers are not agents of BEHRINGER and have absolutely no authority to bind BEHRINGER by any express or implied undertaking or representation. This manual is copyrighted. No part of this manual may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording of any kind, for any purpose, without the express written permission of BEHRINGER International GmbH.

ALL RIGHTS RESERVED. © 2007 BEHRINGER International GmbH, Hanns-Martin-Schleyer-Str. 36-38, 47877 Willich-Muenchheide II, Germany.

Tel. +49 2154 9206 0, Fax +49 2154 9206 4903

Specifications

3