STUDIO CONDENSER MICROPHONES C‑2
1. Safety precautions
Please read all safety precautions and operating instructions before attempting to operate the unit. Keep all safety precautions and operating instructions for future reference.
Water and moisture:
Condenser microphones are extremely
Power supply:
Always use the power supply specified in the operating instructions.
Damage:
Take care not to drop your microphone as this can lead to severe damage. BEHRINGER assumes no liability for any damage caused by the user.
Service and care:
After each use, wipe the microphone down with a soft cloth and place it back into its protective casing (included with the microphone). Then, lay the small bag containing the
2. Introduction
Congratulations! By purchasing the BEHRINGER C‑2, you have obtained 2 condenser microphones that offer the highest quality standards and the best audio characteristics.
Both microphones have been matched to one another (matched pair), and are therefore particularly
Their outstanding characteristics make these microphones a valuable tool in the sudio and on the stage.
3. Power supply
Phantom power (+48 V) is required to operate your microphone. We assume no liability for damage caused to your C‑2 through deffective phantom power. Before activating phantom power, mute your playback system and connect the C‑2 to the microphone input of your mixing con- sole. After activating phantom power, the C‑2 requires several seconds to stabilize itself.
2 | Power supply |