4SINGLE DIAPHRAGM CONDENSER MICROPHONE B-5 User Manual
3.Low Cut-Filter and Level Attenuation (-10 dB)
The B-5 features a switchable low-cut filter that eliminates low-frequency noise such as floor rumble. Set the switch to its middle position to activate the low-cut filter.
For situations in which the microphone is exposed to extremely high sound pressure levels, the B-5 features a switchable level attenuation (“pad”). When the switch is in its “-10 dB” position, the level attenuation is activated.
When the switch is in its top-most position, the signal is not influenced in any way.
4. Microphone Installation
To properly attach your microphone to a microphone stand, a clamp is included. First screw this clamp onto your stand before attaching the microphone itself.
5. Changing Microphone Capsules
When your B-5 leaves the assembly plant, it has the cardioid pickup pattern capsule screwed onto its shaft. To loosen the capsule, hold the shaft firmly and unscrew the capsule turning it counter-clockwise.
◊When installing a capsule, please make sure to handle both the capsule and the microphone shaft with attention and care to avoid damaging the screw thread. In no situation should you ever apply excessive force.
6. Audio Connection
To connect the B-5 to your equipment, use a balanced XLR microphone cable with the following pin assignment: Pin 1 = shielding, pin 2 = +, pin 3 = -. Since all contact points of the B-5 are gold-plated, your microphone cable too should feature gold-plated connectors, if possible.
