Behringer BCR2000 7

B-CONTROL FADER BCF2000/B-CONTROL ROTARY BCR2000

Fig. 3.1: The control surface of the B-CONTROLs

Fig.3.2: The back of the BCF2000 (control elements to coincide with the BCR2000)

CONTROLLER connector (BCF2000 only). Here, you can connect an expression pedal that can be used for controlling assignable MIDI data.

The POWER switch turns your B-CONTROL on. The POWER switch should always be in its “Off” position when connecting the unit to the mains.

+Please keep in mind: The POWER switch does not fully disconnect your B-CONTROL from the mains. Always unplug the power cord from the mains if you don’t intend to use your B-CONTROL for longer periods of time.

The connection to the mains is established using a standard connection socket. A matching cable is included in the shipment.

SERIAL NUMBER. Please take the time to fill out and return the warranty card within 14 days after the date of purchase to benefit from our extended warranty. The serial number is located on the top side of your REV2496. You can also register online at www.behringer.com.

3. CONTROL ELEMENTS AND CONNECTIONS

7

Contents

Page IMPORTANT SAFETY PRECAUTIONS FOREWORD TABLE OF CONTENTS 1. INTRODUCTION 2. INTRODUCTION TO MIDI 4. OPERATION 1. INTRODUCTION 1.1.1 Shipment 1.1.2 Initial operation 1.1.3 Warranty 2.INTRODUCTION TO MIDI sset filter frequency to CC sset filter resonance to CC 06 (receive) sset volume to CC 07 (receive) sAssign the push encoder 1 CC 05 to filter frequency control via dial rotation sAssign the push encoder 2 CC 06 to filter resonance control via dial rotation 3.CONTROL ELEMENTS AND CONNECTIONS Page 4. OPERATION 4.1.1 USB modes USB-Mode U-2: Fig. 4.2: Routing and use in USB mode USB-Mode U-3: Fig. 4.3: Routing and use in USB mode This is surely the most often used “standard mode” with computer applications 4.1.2 Stand-alonemodes Stand Alone-Mode S-1: Fig. 4.6: Routing and use in stand-alonemode Stand Alone-Mode S-2: Fig. 4.7: Routing and use in stand-alonemode Stand Alone-Mode S-3: Fig. 4.8: Routing and use in stand-alonemode Stand Alone Mode “S-4”: Fig. 4.9: Routing and use in stand-alonemode Important information about stand-alonemodes: 4.2.1 Selecting a preset 4.2.2Copy/store presets 4.2.3 Copying encoder groups 4.3.1 The LEARN function 4.3.2 Programming in EDIT mode Page Tab. 4.2: Assignment of the push encoders in EDIT mode (CONTINUOUS types) Table explanation: CONTINUOUS-typeelements: LED display of the push encoders: OFF The LED circle remains off 2d Just like “2d”, but when the value is 0, no LED lights up Bar successively (for volume etc.) Bar- Just like bar display, but when the value is 0, no LED MMC: MIDI Machine Control data is only assignable to button elements GS/XG: Table 4.3: GS/XG Parameter Main Controls Encoders 4 and 5 let you confine or invert each controllers’ value range Page 5. APPENDIX 6. SPECIFICATIONS 7.WARRANTY FEDERAL COMMUNICATIONS COMMISSION COMPLIANCE INFORMATION B-CONTROLFADER BCF2000 FADER BCF2000-WH/ROTARYBCR2000 Responsible party name: MUSIC Group Services USA, Inc