ULTRABASS BT108
+If the unit is damaged, please do NOT return it to BEHRINGER. Instead, notify your dealer and the shipping company immediately. Otherwise, claims for damage or replacement may not be honored.
+Always use the original packing carton to prevent damage during storage or transport.
+Make sure that no children are left unsupervised with the BT108 or its packaging.
+Please ensure proper disposal of all packing materials.
1.1.2 Initial operation
Be sure that there is enough space around the unit for cooling. To avoid overheating, please do not place the ULTRABASS near radiators and other equipment emanating heat.
+Please keep in mind that all the equipment has to be grounded at all times. For your own protection, never change or disable the grounding on your equipment or on the cables! The unit shall always be connected to the mains socket outlet with a protective earthing connection.
1.1.3 Online registration
Please do remember to register your new BEHRINGER equipment right after your purchase by visiting www.behringer.com (alternatively www.behringer.de) and kindly read the terms and conditions of our warranty carefully.
Should your BEHRINGER product malfunction, our goal is to have it repaired as quickly as possible. To arrange for warranty service, please contact the retailer from whom the equipment was purchased. Should your BEHRINGER dealer not be located in your vicinity, you may directly contact one of our subsidiaries. Corresponding contact information is included in the original equipment packaging (Global Contact Information/European Contact Information). Should your country not be listed, please contact the distributor nearest you. A list of distributors can be found in the support area of our website (www.behringer.com/).
Registering your purchase and equipment with us helps us process your repair claims quicker and more efficiently.
Thank you for your cooperation!
2. WIRING TIPS
Figures 2.1 and 2.2 show you how to connect your bass to the amplifier.
If you want to use an effects unit (for example, the BEHRINGER
XV-AMP PRO) to experiment with some out-of-the-ordinary sounds, you can connect your bass directly to the input of the unit. Then, connect a second cable from the effects output to the input on your bass amp.
If you have an electronic tuner, please be sure to insert it pre effects device, so that the tuner only receives a dry signal without effects components.
X V-AMP PRO: no additional tuner required.
+The built-in loudspeaker is disabled automatically when you plug in the headphones.
Fig. 2.1: Example of a setup using the ULTRABASS BT108
Fig. 2.2 shows a recommended setup for amplifying the sound of your BT108 using a sound reinforcement system of any size. This way, you can also use your amp for playing live or for rehearsals with your band.
Fig. 2.2: Live setup
2. WIRING TIPS | 5 |
