Behringer BX300 +

ULTRABASS BX300

2.3.1 ULTRABASS BX300 as master device

The PREAMP OUT jack allows you to connect the BX300 to an external power amp, using a commercial

instrument cable equipped with mono phone plugs. Then, connect the PREAMP OUT jack to the input on the

external power amp.

2.3.2 ULTRABASS BX300 as slave device controlled by an external amp/preamp

To use the power amp of your ULTRABASS for an external amp or preamp you need to connect the line output

of the external amplifier to the POWER AMP IN jack on your BX300.

The SHAPE function on your BX300 provides a revolutionary type of filter that you can use to modify your bass

sound in full detail. The filter allows you to shape your soundwhich is a must for bass players today. Extreme

filter settings will give your bass sound more power, for example:

You want to play a live bass solo but the sound doesnt cut through. The solo should stand out, rather than

being drowned. Set up a solid basic sound, then use the SHAPE filter to create a very distinctive solo sound.

Use the IN button to toggle between the two sounds.

The SHAPE filter is a bargain when you are using two different bass guitars. Maybe you want to change from

a jazz bass to a fretless bass, and vice versatwo instruments with a completely different sound. During gigs

you often lack the time to set up your amp for a different instrument, so youll be happy to have a BX300,

because you can use the SHAPE filter for your fretless sound, and the basic sound for the jazz bass.

Except for the tape input which has cinch connectors, all inputs and outputs of your BEHRINGER ULTRABASS

are on mono 1/4" jacks.

+Please ensure that only qualified personnel install and operate the BX300. During installation

and operation the user must have sufficient electrical contact to earth. Electrostatic charges

might affect the operation of the unit.