8
ULTRABASS BX300
9The PREAMP OUT allows you to drive an external bass amplifier.
+You can also use the PREAMP OUT to connect a tuner.
10 Use the POWER AMP IN to feed in the output signal from an external bass amplifier.
+The PREAMP OUT and POWER AMP IN connectors can also be used to insert an external
effects device such as our BEHRINGER VIRTUALIZER PRO DSP1024P. Simply connect the
PREAMP output to the input, and the POWER AMP input to the output of the effects unit.
11 The 1/4" stereo PHONES jack allows you to monitor the BX300s audio signal with a pair of headphones.
Connecting the headphones will mute the built-in speaker.
12 Use the POWER switch to switch the BX300 on or off.
1.3.2 Rear panel