2STUDIO CONDENSER MICROPHONE C-1 User Manual

Important Safety Instructions

After each use, wipe the microphone down with a soft cloth and place it back into its protective

casing (included with the microphone). The small bag containing the moisture-absorbing crystals should remain

in the casing to help keep your microphone dry.

Terminals marked with this symbol carry electrical current of sufficient magnitude to constitute

risk of electric shock. Use only high-quality commercially-available speaker cables with ¼" TS plugs pre-installed. All other installation or modification should be performed only by qualified personnel.

This symbol, wherever it appears, alerts you to the presence of uninsulated dangerous voltage

inside the enclosure - voltage that may be sufficient to constitute a risk of shock.

This symbol, wherever it appears, alerts you to important operating and maintenance instructions in

the accompanying literature. Please read the manual.

Condenser microphones are extremely moisture-sensitive. Never use your microphone in

close proximity to water (e.g. bath tubs, wash basins, sinks, washing machines, pools, etc.).

Always use the power supply specified in the operating instructions.

Take care not to drop your microphone as this can lead to severe damage. BEHRINGER

assumes no liability for any damage caused by the user.

CAUTION

Never dismount the screen holding the capsule, as this can damage

the microphone! Never try to modify the printed circuit board inside your C-1! This can lead to microphone damage that cannot be repaired. Any such attempt will void the warranty.

Limited Warranty

Please register your new BEHRINGER equipment right after your purchase by visiting behringer.com and read the terms and conditions of our warranty carefully.