2C-1U User Manual

Important Safety

Instructions

Terminals marked with this symbol carry electrical current of sufficient magnitude to constitute risk

of electric shock. Use only high-quality commercially-available speaker cables with ¼" TS plugs pre-installed. All other installation or modification should be performed only by qualified personnel.

This symbol, wherever it appears, alerts you to the presence of uninsulated dangerous voltage

inside the enclosure - voltage that may be sufficient to constitute a risk of shock.

This symbol, wherever it appears, alerts you to important operating and maintenance instructions in the

accompanying literature. Please read the manual.

Condenser microphones are extremely moisture-sensitive. Never use your microphone in close

proximity to water (e.g. bath tubs, wash basins, sinks, washing machines, pools, etc.).

Caution

Always use the power supply specified in the

operating instructions.

Caution

Take care not to drop your microphone as this can lead to

severe damage. BEHRINGER assumes no liability for any damage caused by the user.

After each use, wipe the microphone down with a soft cloth and place it back into its

protective casing (included with the microphone). The small bag containing the moisture-absorbing crystals should remain in the casing to help keep your microphone dry.

Caution

Never dismount the screen holding the capsule, as this can damage

the microphone! Never try to modify the printed circuit board inside your C‑1U! This can lead to microphone damage that cannot be repaired. Any such attempt will void the warranty.

In exceptional cases, external interference (e.g. contact and electrostatic discharge) may affect the functioning of the unit and result in audio or functional impairment. In any such case, please disconnect the unit briefly from the USB port and restart the application to return to normal operation.

The sound quality may diminish within the range of powerful broadcasting stations and high-frequency sources. Increase the distance between the transmitter and the device and use shielded cables for all connections.