CHORUS SPACE-D CD400
Thank you for showing your confidence in us by purchasing the BEHRINGER CHORUS
The chorus effect adds a shifting detuned signal to the original, similar to playing in unison in a group of instruments, and it is often used for dispersing sounds.
1. CONTROLS
Top view
The LEVEL control adjusts the effect sound level.
The EQ control allows you to shape your overall effect sound. Turning it to the right will emphasize high frequencies while turning to the the left will cut them.
The RATE control determines the chorus effect speed.
Turn up the DEPTH control to achieve a fuller and deeper effect sound.
The ON/BATT LED illuminates when the effect is activated. It also serves as a battery level indicator.
Use the footswitch to activate/deactivate the effect.
Use this 1/4" TS IN connector to plug in the instrument cable.
The two 1/4" TS OUT A and OUT B connectors send the signal to your amp. Use both connectors if you want to achieve full stereo chorus effect. For mono use plug in OUT A only.
Use the DC IN connection to plug in a 9 V power supply (not included).
The BATTERY COMPARTMENT is located underneath the pedal cover. To install or replace the 9 V battery (not included), press the hinges with a ballpoint pen and remove the pedal cover. Be careful not to scratch the unit.
The CD400 has no on/off switch. As soon as you insert the plug into the IN connector, the CD400 begins running. When not using the DC400, remove the plug from the IN connector. This extends the life of the battery.
The SERIAL NUMBER is located on the underside.
In rare cases interferences of the normal function may appear by external influence (e.g. electrostatic discharge), as for example sound disturbances or malfunctions. If this occurs, please turn down the volume on subsequent amplifiers and disconnect the input connector briefly to restart the application.
