![](/images/backgrounds/250322/250322-32x1.png)
DYNAMIC WAH DW400
(9)The ON/BATT LED illuminates when the effect is activated. It also serves as a battery level indicator. If the Tap function is active, the LED flashes.
(10)Use the foot switch to activate/deactivate the effect. When pressing the foot switch 2 seconds or longer, you can tap in the Auto Wah effect time (ON/BATT LED flashes).
Use the DC IN connection at the front of the unit to plug in a 9 V power supply (not included).
The BATTERY COMPARTMENT is located underneath the pedal cover. To install or replace the 9 V battery, press the hinges with a ballpen and remove the pedal cover. Be careful not to scratch the unit.
◊The DW400 has no On/Off switch. It is operable as soon as you insert a plug into the IN connector. Disconnect the plug, if you don’t use the DW400. In doing so, you can extend the life time of the battery.
The SERIAL NUMBER is located at the underside.
◊In rare cases interferences of the normal function may appear by external influence (e.g. electrostatic discharge), as for example sound disturbances or malfunctions.
If this occurs, please turn down the volume on subsequent amplifiers and disconnect the input connector briefly to restart the application.
2. Safety Instructions
Do not use near water, or install near heat sources. Use only authorized attachments/accessories. Do not service product yourself. Contact our qualified servicing personnel for servicing or repairs, especially when power supply cord or plug is damaged.
3. Warranty
Please register your new BEHRINGER equipment right after your purchase by visiting http://behringer.com and read the terms and conditions of our warranty carefully.
4. Specifications
GTR IN / BASS INConnector | ¼" TS | |
Impedance | 500 kΩ | |
OUT |
| |
Connector | ¼" TS | |
Impedance | 1 kΩ | |
EXP/CTL |
| |
Connector | ¼" TRS | |
Impedance | 1 kΩ | |
Power Supply |
| |
|
| 9 V��, 100 mA regulated |
BEHRINGER |
| |
| USA/Canada | 120 V~, 60 Hz |
| China | 220 V~, 50 Hz |
| Korea | 220 V~, 60 Hz |
| Europe/Australia | 230 V~, 50 Hz |
| Japan | 100 V~, 50/60 Hz |
Power connector | 2 mm DC jack, | |
|
| negative center |
Battery | 9 V type 6LR61 | |
Power consumption | 30 mA | |
Physical/Weight |
| |
Dimensions | approx. 2 1/8 x 2 3/4 x 4 4/5" | |
(H x W x D) | approx. 54 x 70 x 123 mm | |
Weight | approx. 0.73 lbs / 0.33 kg |
BEHRINGER is constantly striving to maintain the highest professional standards. As a result of these efforts, modifications may be made from time to time to existing products without prior notice. Specifications and appearance may therefore differ from those listed or shown.
TECHNICAL SPECIFICATIONS AND APPEARANCES ARE SUBJECT TO CHANGE WITHOUT NOTICE AND ACCURACY IS NOT GUARANTEED. BEHRINGER IS PART OF THE MUSIC GROUP