DYNAMIC WAH DW400

Ultimate Auto-Wah/Human Voice Effects Pedal

Thank you for showing your confidence in us by purchasing the BEHRINGER DYNAMIC WAH DW400. This effects pedal delivers a variety of wah effects including a Human Voice mode creating an unbelievable “talking” sound. Experience exciting new sounds!

1. Controls

(1)Select the effect mode via the MODE switch:

UP: Creates a Wah effect. The filter moves upwards (from low to high frequencies).

DOWN: Creates a Wah effect. The filter moves downwards.

SYNTH: A stronger upward Wah effect with a synth-like resonance filter sound.

HUMAN VOICE: Turns your instrument signal into the sound of a human voice. The sound alters between 2 selectable vowel sounds and adds slight overdrive.

TEMPO: Auto Wah. Tap in the tempo via foot switch (10) or external foot switch.

(2)SENS determines the effect sensitivity, depending on the input level. In HUMAN VOICE mode, it selects the first vowel. In TEMPO mode, this control has

no function.

(3)

(9)

(4)

(1)

 

(2)

(8)

(6)

(5)

(7)

 

(10)

(3)The MANUAL control determines the wah

effects’ lowest frequency. In HUMAN VOICE mode, it selects the second vowel. In TEMPO mode, this control has no function.

(4)The DECAY control determines how quickly the filter is shifted. In TEMPO mode, you can shape the LFO waveform­ from Sine (min) to Square wave (max).

 

UP, DOWN, SYNTH

HUMAN VOICE

TEMPO

SENS

effect sensitivity,

Wah 1:

no function

depending on input level

Selects the first vowel

 

 

MANUAL

starting frequency

Wah 2:

no function

of Wah effect

Selects the second vowel

 

 

DECAY

Envelope

Selects the Time used to

LFO waveform shape:

Response Time

move from Wah 1 to Wah 2

Sine (Min) > Square (Max)

 

EXP/CTL*

Wah pedal (SENS, MANUAL

Fades between Wah 1 and

Wah pedal

and DECAY disabled)

Wah 2 (DECAY disabled)

(DECAY disabled)

 

*Connect an expression pedal (e.g. the FCV100) to the EXP/CTL connector

(5)The ¼" TRS EXP/CTL connector can be used to connect two different types of pedals:

•Use an expression pedal for Wah pedal functionality (for all modes).

•Use an external foot switch instead of the pedal foot switch ((10)) to tap in the effect time (in Tempo mode only).

(6)Use the ¼" TS GTR IN connector to plug in a guitar. Use either input (6) or (7).

(7)Use the ¼" TS BASS IN connector to plug in a bass guitar. If you use this input, the filter parameters are optimized for bass signals. With a cable in input (6), this input has no function.

(8)The ¼" TS OUT connector sends the signal to your amp or other effects devices.