EUROPOWER EP1500
Specifications
Output power
20 Hz - 20 kHz @ 0.1% THD, both channels driven
8 | Ω per channel | 260 W |
4 | Ω per channel | 400 W |
1 kHz @ 0.1% THD, both channels driven | ||
8 | Ω per channel | 280 W |
4 | Ω per channel | 450 W |
2 | Ω per channel | 700 W |
Bridged Mono |
| |
8 | Ω, 20 Hz - 20 kHz, 0.1% THD | 800 W |
8 | Ω, 1 kHz, 0.1% THD | 900 W |
4 | Ω, 1 kHz, 1% THD | 1400 W |
Distortion
| < 0.01% |
Frequency response |
|
at 10 dB below rated output power | 20 Hz - 20 kHz, |
at | 5 Hz - 50 kHz |
Damping factor |
|
| > 300 @ 8 Ω |
Noise |
|
unweighted, 20 Hz to 20 kHz |
|
Voltage gain |
|
| 40x (32 dB) |
Input sensitivity |
|
V RMS (@ 8 W) | 1.15 V (+3.4 dBu) |
Input impedance |
|
| 10 kΩ unbalanced, |
| 20 kΩ balanced |
Controls |
|
Front | Power switch, gain control |
| (channels 1 and 2) |
Rear | DIP switches (10x) |
Indicators |
|
POWER | green LED |
CLIP | red LED, 1 per channel |
SIGNAL | yellow LED, 1 per channel |
Connectors |
|
Inputs | Balanced XLR and |
| 1/4" TRS connectors |
Outputs |
|
| Neutrik Speakon |
Cooling |
|
| Continuously variable speed fan, |
|
|
Amplifier protection |
|
| Full short circuit, open circuit, |
| thermal and HF protection |
| Stable into reactive or |
| mismatched loads |
Load protection |
|
|
|
Output circuit type |
|
| Class AB complementary linear |
| output |
Power supply
Mains voltage/Breaker |
|
100 | 15 A |
220 | 8 A |
Power consumption | 1600 W |
Mains connector | Standard IEC receptacle |
Dimensions/Weight
Dimensions (H x W x D) | approx. 88 x 482.6 x 402 mm |
| approx. 3 1/2" x 19" x 15 4/5" |
Weight | approx. 15.7 kg |
| approx. 34.6 Ibs |
BEHRINGER makes every effort to ensure the highest standard of quality. Necessary modifications are carried out without notice. Thus, the specifications and design of the device may differ from the information given in this publication.
| 3 |