7EUROPORT EPA40 User Manual
(9)You can connect an external sound source (CD player, MP3 player, etc.) to the LINE IN input.
(3) | (2) | (3) |
DC IN 18V 3A
|
|
|
|
|
|
|
|
|
|
(1) | (4) (5) | (8)(9)(10) | (7) (6) | (11) | |||||
Fig. 2.1: Side view of the EPA40
(10)Connect to the power supply via the polarized DC IN connector. A fitting power adapter is supplied. Use the device only with the included power supply.
(11)COMPARTMENT FOR BATTERY AND SHOULDER STRAP. To insert the battery, open the compartment’s cover.
The bottom half of the compartment is used for the battery. Open the latch to access the battery compartment.
Insert the battery as follows: The terminals must face the device with the positive terminal (red) on the side of the EPA control panel (to the left, as seen from the rear panel). Insert the battery and close the latch. Close the battery compartment.
◊Insert the rechargeable battery with the terminals connected to the correct polarity.
◊Remove the rechargeable battery when the device is not to be used for a long period. Store the rechargeable battery in an upright position (with the terminals facing upward).
The device’s SERIAL NUMBER is found on the bottom side of the unit.
3. Specifications
Inputs
| MIC IN | ¼" TRS jack, unbalanced |
| LINE IN | 1/8" jack, unbalanced |
| Output |
| |
| Output power | 40 W |
| Loudspeaker | 5" |
| Microphone |
| |
| Type | BEHRINGER XM1800S, |
|
| dynamic |
| Pickup pattern | |
| Cable length | 3' spiral cable |
| System Data |
| |
| Power supply | with |
|
| rechargeable battery |
| Rechargeable battery type | 12 V DC / 2600 mAh |
| Charging time | approx. 4 h |
| Battery operating time | up to 8 h |
| External recharger type | 18 V DC / 3 A |
| Mains voltage | 100 - 240 V~, 50/60 Hz, 1.5 A |
|
| (Switching mode adaptor) |
| Mains connector | Standard IEC receptacle |
| Physical/Weight |
| |
| Dimensions (H x W x D) | approx. 8.5 x 7.1 x 11.2" |
|
| approx. 217 x 180 x 284 mm |
| Weight (without power supply) | approx. 7 lbs / 3.20 kg |
BEHRINGER is constantly striving to maintain the highest professional standards. As a result of these efforts, modifications may be made from time to time to existing products without prior notice. Specifications and appearance may differ from those listed or illustrated.