9EUROPORT EPA900 User Manual

POWER Switch

Use the POWER switch to start up the unit. The POWER switch should be in the “Off” position when you connect the unit to the AC power supply.

To disconnect the unit from the power supply, pull out the power plug. When starting up the unit, ensure that the power plug is easily accessible.

◊Please note: Switching the POWER switch off does not completely disconnect the unit from the power supply. For this reason, you should unplug the power cord if the unit is not going to be used for a long period of time.

VOLTAGE SELECTOR

The VOLTAGE SELECTOR switch lets you set the correct operating voltage.

◊Before connecting the unit to the mains, please check that it is set to the correct supply voltage.

◊You have to use another fuse if you set the unit to another supply voltage. The correct value is specified in Chapter “Specifications”.

SERIAL NUMBER

The serial number can be found on the back of the mixer. It is needed for online registration.