Behringer manual Everything You Need, EPX4000/EPX2800, Panel Discussion

Page 2 of 5

EUROPOWER EPX4000/EPX2800

Built-in Subwoofer/Satellite crossover for more flexibility

Independent DC and thermal overload protection on each channel automatically protects amplifier and speakers without shutting down the show

“Back-to-front” ventilation system including air filter for reliable operation

“Built-like-a-tank“, impact-resistant, all-steel 2U rackmount chassis

High-quality components and exceptionally rugged construction ensure long life

Conceived and designed by

BEHRINGER Germany

Accelerated Transient Response Delivers the Knockout Punch

It takes huge pulses of energy (current and voltage) to propel a woofer cone out fast enough to match a bass beat. That’s called Transient Response and it’s the holy grail of amp designers. By carefully selecting transistors with extremely high slew rates and optimizing other proprietary parts of our circuitry, EPX amps can react instantly to even the most demanding electronic bass impulses. If the woofers in your PA system can keep up, your audience will hear a tighter, crisper, more natural sound.

BEHRINGER didn’t invent Class-H technology, but our R&D Department has been working for years to perfect our own version, creating lightweight amps that run cool and achieve our goal of Accelerated Transient Response.

Everything You Need

The simple front panel controls of these amps give you all of your sound’s vital signs at a glance. After pressing

EPX4000/EPX2800

the Power Button, the POWER LED will light when the amp is ready for action. Both channels have independent gain dials, as well as CLIP LEDs that notify you when the signal is distorted and you need to reduce the gain. There are also SIGNAL LEDs that light up when a signal is present at the input.

Panel Discussion

The EPX Series’ INPUTs accept balanced XLR, ¼" TRS, and unbalanced ¼" TS and RCA connections. Take your pick of professional locking speaker outputs or touch-proof binding posts to securely connect speakers.

A panel of switches located on the back offers an array of cool options applicable to both channels. The switchable Clip Limiter lets you get even more out of the amplifier without overdriving either it

or your speaker system. Built-in circuitry automatically senses when the amp is being overdriven into “clipping” and instantaneously reduces the input level just enough to avoid clipping distortion.

Continued on next page

	Signal
Detented	level LED		Power
channel	meter with	Ventilation
GAIN controls	clipping LED	openings	Switch

0

-10

-20

		“Touch-proof”	Built-in CROSSOVER
IEC	Professional	binding	switch — dedicated
power	locking speaker	posts speaker	100 Hz CH1/CH2 or
socket	connections	outputs	FULLRANGE

Cooling	INPUT accepts	LIMITER	MODE switch
fans	balanced XLR,	on/off	— mono/
	¼" TRS, and	switch	stereo/bridge
	unbalanced
	¼" TS and
	RCA connections