EUROPOWER EP1500/EP2500

The BEHRINGER EUROLIVE SERIES loudspeakers are an outstanding solution for expanding your P.A. system, because each frequency range/application has a speaker type that optimally suits its characteristics.

+Extreme clip limiter settings in bi-amp operating mode can result in balance shifting.

Fig. 3.7: Stereo bi-amp mode with a separate subwoofer

4. INSTALLATION

Your EUROPOWER can be installed into a 19" rack and requires two rack units. Please use four attaching screws and washers for installation. Reinforce the back end, especially for on-the- road use. Please assure that enough cool air reaches the rack, especially when other rack equipment emanates a lot of heat. In the case of the EUROPOWER EP1500 and EP2500, hot air circulates at the front of the unit to thermally relieve the rack enclosure.

+Fan speed adjusts automatically and assures safe operation. Never block ventilation openings. Should internal temperature reach extreme values, the unit will shut down automatically.

4.1 Connections

Inputs

Each channel features balanced XLR and 1/4" TRS stereo jack inputs, with input impedances of 20 kΩ (balanced) and 10 kΩ (unbalanced). In general, balanced signals cause less noise than unbalanced signals.

For balanced input signals, use the XLR and 1/4" TRS stereo inputs. For unbalanced input signals, use the unused pin of the XLR connector with grounding. No alteration is necessary on mono jack connectors (see plug type illustrations on page 10).

+Should you register distractive signals such as noise or hissing, we recommend separating the amp input from the signal source. This way, you can quickly determine if the noise originates in the equipment connected to the amp. Always make sure to completely lower amplification of both channels before powering up the amp (GAIN control turned all the way leftward). Otherwise, permanent damage to your speakers may occur.

Outputs

Your EUROPOWER offers several output connection possi- bilities: two Neutrik NL4MD Speakon® connectors and two pairs of touch-safe binding posts. The Speakon® connectors were especially developed for driving high-power speakers. They snap in securely, prevent electric shock and assure correct polarity. The upper Speakon® connector drives either one or both channels, and is therefore well-suited for mono-bridged operation (1+/2+). The lower connector carries the signals from channel 2 only.

Fig. 4.1: Speakon® connectors

+Whenever possible, use thick and short speaker cables to minimize power losses. Never lay out output cables near input cables.

4. INSTALLATION

9

Page 8 Page 10
Page 9
Image 9
Behringer EP2500, EUROPOWEREP1500 manual Installation, Connections
Page 8 Page 10

EP2500, EUROPOWEREP1500 specifications

The Behringer EUROPOWER EP1500 and EP2500 are professional-grade power amplifiers designed to deliver exceptional sound quality and robust performance for various audio applications. These amplifiers are ideal for live sound, installations, and recording studio setups, catering to audiophiles and professionals alike.

One of the standout features of the EUROPOWER series is its high output power. The EP1500 delivers a remarkable 2 x 750 watts at 4 ohms, while the EP2500 boasts an impressive 2 x 1200 watts at the same impedance. This ability to produce significant power ensures that users can drive their speakers effectively and maintain clarity even at louder volumes.

Both models feature an efficient cooling system, which includes a built-in fan that operates quietly, ensuring that the amplifiers remain cool during extended use without distracting from the performance. This thermal efficiency is critical in maintaining reliability, especially in demanding environments.

The build quality of the EUROPOWER amplifiers is rugged, featuring a durable metal chassis designed to withstand the rigors of touring and frequent transportation. Additionally, they are equipped with a user-friendly front panel that includes gain controls, LED indicators for signal and clip status, and a power switch for easy operation.

In terms of connectivity, the EP1500 and EP2500 provide various input and output options. They feature XLR and TRS inputs for greater flexibility in connecting to mixing consoles or other audio sources. The outputs include Speakon and binding posts, allowing for compatibility with a wide array of speaker systems.

These amplifiers also incorporate advanced technologies such as a low-noise input stage, which ensures a clean signal path and minimizes distortion. Furthermore, built-in limiters protect the speakers from damage by preventing clipping during high output levels, a crucial feature for maintaining audio fidelity and system integrity.

Another important characteristic of the EUROPOWER series is its reliability. They are designed to handle both low and high frequencies efficiently, ensuring that the sound remains balanced across the entire spectrum. This is particularly beneficial in live sound situations where clarity and punch are essential.

In summary, the Behringer EUROPOWER EP1500 and EP2500 are formidable power amplifiers equipped with high output capabilities, efficient cooling systems, and rugged durability. Their diverse connectivity options and advanced technologies make them suitable for a wide range of audio applications, providing professionals with the reliability and performance needed to achieve outstanding sound reinforcement. Whether for concerts, festivals, or installation in venues, the EUROPOWER series stands out as a dependable choice for audio professionals.
Top Page Image Contents