Behringer Eurorack +

EURORACK UB1222FX-PRO

4. INSTALLATION

Fig. 4.1: 1/4" TS footswitch connector

4.2.1 Audio connections

Please use commercial RCA cables to wire the 2-track inputs

and outputs.

You can, of course, also connect unbalanced devices to the

balanced input/outputs. Use either mono plugs, or ensure that

ring and sleeve are bridged inside the stereo plug (or pins 1 & 3

in the case of XLR connectors).

+Caution! You must never use unbalanced XLR

connectors (pins 1 and 3 connected) on the MIC

inputs if you intend to use the phantom power

supply.

Contents

Main EURORACK UB1222FX IMPORTANT SAFETY INSTRUCTIONS UB1222FX-PRO EURORACK 1. INTRODUCTION FOREWORD TABLE OF CONTENTS 1. INTRODUCTION .........................................................4 2. CONTROL ELEMENTS AND CONNECTORS.............. 6 3. DIGITAL EFFECTS PROCESSOR AND XPQ SURROUND FUNCTION................................... 12 + 1. INTRODUCTION 1.1 General mixing console functions 1.2 The users manual + 1.3 Before you get started 1.3.1 Shipment + 1.3.2 Initial operation + 1.3.3 Warranty 2. CONTROL ELEMENTS AND CONNECTORS 2.1 Mono channels 2.1.1 Microphone and line inputs + 2.1.2 Equalizer 2.1.3 Aux sends (MON and FX) 2.1.4 Pan, mute switch and channel fader + 2.2 Stereo channels 2.2.1 Channel inputs 2.2.2 Equalizer stereo channels 2.2.3 Aux sends stereo channels + 2.3.2 Monitor send and FX send connector + 2.3.3 Aux return connectors + 2.3.5 Main mix, main out connectors and headphone connector CAUTION! + 2.3.6 Level meter and level setting + 2.4 Graphic 7-band equalizer Page 4. INSTALLATION 4.2.1 Audio connections + 5. SPECIFICATIONS 5. SPECIFICATIONS 6. WARRANTY 6. WARRANTY