FOOT CONTROLLER FCV100
Fig. 2.2: FCV100 controls (part 2)
When the battery LED indicator dims or does not light up, you need to replace the battery. For instructions on how to replace the battery, please refer to chapter 3 “BATTERY INSTALLATION & REPLACEMENT”.
Connect your instruments via the INPUTS 1/2 using the “NORM” mode. In “CV” mode, INPUT 2 of your FVC100 can not be used since the control signal comes exclusively from OUTPUT 2. As stated before, you may use INPUT 1/OUTPUT 1 in “CV” mode to control the volume level of another instrument.
Fig. 2.3: FCV100 controls (part 3)
4 | 2. CONTROL ELEMENTS |
