2. WIRING HINTS
The following illustrations show you how to connect your guitar to the amp.
If you want to use stomp boxes or an effects pedal to experi- ment with different new sounds, simply connect the guitar directly to the input of your effects unit. Of course, you will need an additional cable for this purpose to connect the output of the effects unit to the amp input.
If you own an electronic tuner, you should hook it up pre effects unit to avoid interference.
+Your amp’s speaker is automatically muted when you insert a plug into the headphone connector 
.
Fig. 2.1:
Fig. 2.2: Live setup (example)
Fig. 2.2 shows how your GM108 can be connected to a sound reinforcement system. This way, your amp can hold its turf even when used for performing live or with a loud band.
2. WIRING HINTS | 5 |
