ULTRAROC GX110

15

FUSE HOLDER/VOLTAGE SELECTOR. Please make sure that the voltage indicated on the unit, matches your local voltage, before you attempt to connect and operate the ULTRAROC GX110. Blown fuses may only be replaced by fuses of the same type and rating. Some models allow for inserting the fuse holder in two different positions, in order to switch over from 230 V to 115 V operation, and vice versa. Please note that for 115 V operation outside Europe, you need to use a fuse of a higher rating (see chapter 5 “INSTALLATION”).

16

17

Use the enclosed power cord to connect the unit to the mains.

MIDI IN. This connector gives you MIDI remote control over your ULTRAROC. You can change parameters using controller information, switch over effect programs, change channels and bypass the effects module by means of program change instructions.

18

19

SERIAL NUMBER. Please take the time to have the warranty card filled out completely by your specialized dealer, and return it within 14 days after the date of purchase, so as to be entitled to benefit from our extended warranty.

Use the LOUDSPEAKER jack to connect a supplementary speaker to your ULTRAROC. Optimum adaptation is ensured with 8 Ω speakers. Inserting a plug into this jack will mute the built-in speaker.

20

The 1/4" jack PHONES allows you to monitor the ULTRAROC’s audio signal with a pair of commercially available headphones. Connecting the headphones will mute the built-in speaker.

+Since speakers can have quite an impact on the sound of a guitar amp, both the headphones and LINE OUT signals are frequency-corrected (Speaker Emulation). Without this frequency correction extreme treble frequencies would deteriorate the sound. You can still tap the unprocessed signal directly after the pre-amp (INSERT SEND jack), without interrupting the signal path in the amplifier (INSERT RETURN jack may not be used in this case). Starting with a certain volume level, low-impedance headphones may begin to produce distortion. In such a case, please reduce the volume by turning down the VOLUME controls.

21

22

The AUX TRIM control determines the volume of AUX signals fed into the ULTRAROC via the AUX IN jacks on the rear (e.g. drum computer, playback).

The LINE OUT provides the ULTRAROC’s audio signal, for example, to send it to a recording machine. This output is frequency-corrected (Speaker Emulation).

23

The AUX IN allows you to feed in additional signals, for example, to play with a drum computer or some sort of playback. Additionally, you can use the AUX IN in combination with the INSERT SEND as a parallel effect path: connect the INSERT SEND to the input and the AUX IN to the output of the effects device (INSERT RETURN jack should not be used in this case!). Thus, the signal path in the amplifier will not be interrupted and you can add the effect portion from the external device, using the AUX TRIM control. Please note that the external effects device must be set to 100% wet for this purpose.

+When you connect the INSERT SEND to the AUX IN using a short patch cord, you can add the direct signal to the effect signal via analog circuitry. Advantage: The direct signal will be provided all the time, even while the DSP is loading a new effects program. However, it should be noted that all FX mixes in the presets should be set to higher values, so as to make the effect signal heard.

+Since the entire signal processing circuitry in the ULTRAROC is configured in mono, both the LINE OUT and the headphones output provide the same signal on both (stereo) sides.

24

The ULTRAROC also features a serial insert path for external effects such as a compressor or wah-wah pedal. This is the INSERT SEND jack you need to connect to the input of the effects device.

25

This is the INSERT RETURN jack that can be connected to the output of an external effects device.

+Please note that when using the serial effects path, the external effect should not be set to 100% wet (100% effect signal); otherwise, there will be no direct signal portion fed back to the

ULTRAROC.

26

Connect the enclosed footswitch via its stereo plug to the FOOTSWITCH jack. The footswitch allows you to change channels or disable the effects module.

10

1. INTRODUCTION

Page 9 Page 11
Page 10
Image 10
Behringer GX110 user manual Ultraroc
Page 9 Page 11

GX110 specifications

The Behringer GX110 is a powerful and versatile guitar amplifier designed for both practice and performance. This 10-watt combo amp is ideal for guitarists looking for a reliable and portable solution without sacrificing sound quality. One of the standout features of the GX110 is its powerful 10-inch speaker, which delivers a rich and nuanced sound, making it suitable for a wide range of musical styles.

Equipped with a 3-channel design, the GX110 offers three distinct tones: clean, overdrive, and distortion. The clean channel provides pristine sound quality, perfect for crisp, bright notes, while the overdrive and distortion channels enable musicians to explore heavier genres with ease. The amp also features a built-in reverb effect, adding depth and space to your sound, enhancing the overall listening experience.

One of the technological highlights of the GX110 is its integrated digital effects processor. This feature comes packed with multiple presets, allowing guitarists to add modulation, delay, and other effects seamlessly into their playing. The user-friendly interface makes it easy to dial in your desired sound quickly, making it a convenient choice for gigging musicians needing to switch tones on the fly.

In terms of connectivity, the GX110 is well equipped. It features a headphone output for silent practice, making it perfect for late-night jam sessions without disturbing others. Additionally, the aux input allows musicians to connect their external devices, such as smartphones or tablets, enabling easy playback of backing tracks or favorite songs.

The build quality of the GX110 is another significant aspect. It’s designed to withstand the rigors of daily use, with a robust cabinet and durable grill cloth. The compact size of the amp makes it easy to transport, further enhancing its appeal for musicians on the go.

Overall, the Behringer GX110 stands out as a versatile, user-friendly amplifier that delivers quality sound and features. Whether you are a beginner exploring your musical journey or a seasoned player seeking a reliable practice amp, the GX110 delivers the performance and flexibility that every guitarist needs. With its combination of power, portability, and sound versatility, the GX110 is a worthy addition to any musician's gear collection.
Top Page Image Contents