MICROMON MA400
Welcome to BEHRINGER
Thank you for showing your confidence in us by purchasing the BEHRINGER MICROMON MA400, a monitor headphone amplifier that is both flexible and compact. On your headphones, you can simultaneously listen to two audio signals:
•one from a microphone
•one from a mixer or a
You can even emphasize one signal over the other. Hear yourself sing, or concentrate on the main audio program. Both are possible.
◊Please read the safety instructions that appear at the end of this document.Connectors and Control Elements
(1) | (3) | (4) | (5) | (6) |
(2) | (7) | (8) | (9) | (10) | (11) |
◊High volumes can damage your hearing and your headphones. Before you use the MA400, turn the MIC LEVEL and MON LEVEL controls to 0 (zero).
(1)12 Vconnector:
To connect the power supply unit to the MA400, use the 12 V connector. Connecting the power supply unit to the mains automatically switches the MA400 on. To disconnect the unit from the mains, pull out the main cord plug.
(2)ON LED:
As soon as the unit is connected to the mains, the ON LED is illuminated.
(3)MIC INPUT connector:
To send a microphone signal to the MA400, you need an audio cable that includes XLR connectors.
Plug:
•one XLR connector into the MIC INPUT connector
•the other XLR connector into the microphone
(4)MIC THRU connector:
If you want to route the microphone signal from the MA400 to a mixer, you need an audio cable that includes XLR connectors.
Plug:
•one XLR connector into the MIC THRU connector
•the other XLR connector into a mic input on the mixer
(5)GND LIFT button:
When you connect a mixer to the MA400, keep this button pushed out to maintain a ground connection to the mixer.
This connection prevents electrostatic charges from interfering with your audio signals.
However, if
(6)MONITOR INPUT connector:
To send a signal from a mixer or
Plug:
•one ¼" connector into the MONITOR INPUT connector
•the other ¼" connector into the AUX SEND of a mixer or, alternatively the output of a
(7)¼" PHONES connector, (8) 1/8" PHONES connector: To connect headphones to the MA400, use the ¼" or, alternatively the 1/8" PHONES connector.
◊Do not simultaneously use both PHONES connectors.
(9)MONO / STEREO switch:
To specify the type of mixer or
•a TS connector into the MONITOR INPUT, the MA400 receives a mono signal. Push this switch to MONO.
•a TRS connector into the MONITOR INPUT, the MA400 receives a stereo signal. Push this switch to STEREO.
(10)MIC LEVEL control:
To adjust the volume of the microphone signal, slowly turn this control toward 0 (minimum volume) or, alternatively 10 (maximum volume).
(11)MON LEVEL control:
To adjust the volume of the mixer or
SERIAL NUMBER: To register your unit, use the serial number that is located on the bottom of the MA400.
Warranty
For our current warranty terms, please refer to our website at http://behringer.com. Die deutsche Anleitung ist erhältlich @ behringer.com
Manuel francophone en téléchargement sur behringer.com Manual en español disponible en behringer.com Manuali italiani disponibili @ behringer.com Русскоязычное руководство @ behringer.com
Polska instrukcja dostêpna jest pod adresem @ behringer.com Nederlandse handleiding beschikbaar @ behringer.com Suomenkielinen käyttöohje saatavilla osoitteesta behringer.com Svensk manual finns tillgänglig på behringer.com
Dansk vejledning findes på @ behringer.com Manual português disponível @ behringer.com
Ελληνικό εγχειρίδιο υπάρχει διαθέσιμο στη διεύθυνση behringer.com@ behringer.com @ behringer.com