ENGLISH

4

Strain relief clamp

Sleeve

Tip

Sleeve

(ground/shield)

Tip

(signal)

Unbalanced ¼" TS connector

Right channel

Tip

Ring

Sleeve

 

Sleeve

 

Left channel

Sleeve

 

Tip

Tip

 

¼" TRS to stereo RCA

V-AMP 3 User Manual

Controls and Connectors

Front panel

1.GAIN – Adjusts the distortion level of an amp simulation.2.TREBLE – Adjusts the upper frequencies of the guitar tone.3.MID – Adjusts the mid range frequencies.4.BASS – Adjusts the low frequencies.

5.VOLUME – Adjusts the volume level of the current preset. This will allow you to keep the volume even between various presets.

6.MASTER – Adjusts the overall output to the PHONES and LINE OUT.

7.AMPS – Selects the amp simulation. Hold the TAP button while turning the AMPS knob to select one of the 17-32 amp models (grey lettering).

•Each LED ring around the VOLUME, BASS, MID, TREBLE, GAIN, EFFECTS and REVERB knobs has nine LEDs. Either one LED or two neighboring LEDs (in between position) will light on each ring, indicating a total of 17 positions per knob.

•If the TAP button is held down, the TREBLE knob functions as a PRESENCE control. This allows you to add or remove a high-end “shimmer”in the amp tone.

8.PRESET BUTTONS – Recall saved presets within a bank. These buttons also select various categories in EDIT mode and allow access to Configuration mode. (see EDIT mode and Configuration mode sections)

7

 

1

 

8

2

13

3

14

4

15

5

10

11 12

69