12EUROPOWER PMP1000/PMP3000/PMP5000 User Manual

5.Wiring Examples

Subwoofer

F.O.H. mix

Monitor mix

Loudspeaker connection (monitor mix)

PMP1000/PMP3000/

PMP5000 (part view)

2 x BEHRINGER EUROLIVE

Stack (B1500 & B1020, both passive)

Loudspeaker connection (monitor mix)

front panel (part view)

PMP1000/PMP3000/

PMP5000 Rear panel

EUROPOWER EP1500

EUROPOWER

B1520

EUROPOWER B1500X subwoofer

Footswitch

2 x BEHRINGER B300 (active)

Fig. 5.1: Stereo operation

Link output

2 x BEHRINGER B300 (active)

Fig. 5.2: Bridged mono operation

This illustration shows the power mixer with a sub-woofer connected to OUTPUT B. For a bridged mono operation to OUTPUT B, the AMP MODE selector switch (27) must be set to its lower position “BRIDGE”. A separate stereo power amp (BEHRINGER EUROPOWER EP1500) connected to the preamp main outputs

For stereo operation the POWER AMP switch (27) must be set to its upper position (MAIN or MAIN L/MAIN R). Outputs A and B provide the stereo main signal for passive speakers. The preamp monitor output is connected to two parallel active speakers, which are used as on-stage monitors. Use the footswitch to enable/ disable the effects processor.

delivers the stereo main signal. Two active monitor speakers for on-stage operation are connected to the preamp monitor output.