Behringer SUPER-X PRO CX2310 4.Audio Connections, input, output, strain relief clamp sleeve, tip, strain relief clamp, sleeve ground/shield

9SUPER-X PRO CX2310 User Manual

4.Audio Connections

As a standard, the BEHRINGER SUPER-X PRO CX2310 is equipped with electronically servo-balanced inputs and outputs. The circuit design features automatic hum suppression for balanced signals and so ensures trouble-free operation, even at the highest operating levels. Externally induced mains hum, etc. can therefore be effectively suppressed. The automatic servo-function recognizes the presence of unbalanced connectors and adjusts the nominal level internally to avoid level differences between the input and output signals (6-dB correction).

◊Please ensure that only qualified persons install and operate the SUPER-X PRO. During installation and operation the user must have sufficient electrical contact to earth. Electrostatic charges might affect the operation of the unit.

Unbalanced ¼" TS connector

strain relief clamp sleeve

tip

Balanced ¼" TRS connector

strain relief clamp

sleeve ring tip

sleeve ground/shield

ring cold (-ve)

tip

hot (+ve)

For connection of balanced and unbalanced plugs, ring and sleeve have to be bridged at the stereo plug.

sleeve (ground/shield)

tip

(signal)

Balanced use with XLR connectors

input

1 = ground/shield

2 = hot (+ve)

3 = cold (-ve)

output

For unbalanced use, pin 1 and pin 3 have to be bridged

Fig. 4.1: Different plug types