Behringer SX3040 5. Specifications, Mains Voltage, 4.2.2Connection with insert cables

10SONIC EXCITER SX3040 User Manual

4.2.2Connection with insert cables

Use standard ¼" insert cables to connect the SONIC EXCITER to the insert path of a mixing console. These Y cables have two ¼" TS connectors at one end, and one ¼" TRS connector at the other. Connect the plug marked “Send” to the INPUT

L jack on the effects unit. Connect the “Return” plug to the OUTPUT L jack on the device. Connect the TRS connector to the insert jack of the channel strip on the mixing console. Use two insert cables for stereo sub-groups and main-mix inserts. The second cable must be connected to the INPUT/OUTPUT R jacks of the SX3040.

Return	Send
(out)	(in)
tip	tip
signal	signal
sleeve	sleeve
ground/shield	ground/shield
tip	tip
sleeve	sleeve
strain relief clamp	strain relief clamp

5. Specifications

Inputs
	Connections	XLR sockets and ¼" stereo jacks
	Type	Balanced
	Input impedance	20 kΩ balanced, 10 kΩ unbalanced
	Nominal input level	+4 dBu
	Maximum input level	+22 dBu
Outputs
	Connections	XLR sockets and ¼" stereo jacks
	Type	Servo-balanced
	Output impedance	60 Ω balanced, 60 Ω unbalanced
	Maximum output level	+22 dBu
Bass Processor

strain relief clamp

sleeve

ring tip

sleeve ground/shield

ring return (in)

tip

send (out)

Fig. 4.4: Insert cable with one ¼" TRS (tip-ring-sleeve) jack plug on one end andtwo ¼" TS (tip-sleevel) jack plugs on the other end

	Type		Frequency-selective compressor with
			phase shifter
	Filter cut-off frequency		50 Hz to 160 Hz
Sonic Exciter
	Type		Harmonic exciter
	Filter cut-off frequency		1.3 kHz to 10 kHz
System Data
	Frequency response		10 Hz to 120 kHz, ± 3 dB
	Signal-to-noise ratio		>90 dB, unweighted, 20 Hz to 20 kHz
	Distortion (THD + N)		0.005 % typ. @ +4 dBu, 1 kHz (IN)
	Crosstalk		>90 dB
Power Supply
Mains Voltage
		USA/Canada	120 V AC, 60 Hz
		China/Korea	220 V AC, 50/60 Hz
		Europe/UK/Australia	230 V AC, 50 Hz
		Japan	100 V AC, 50-60 Hz
		Export model	120/230 V AC, 50-60 Hz
	Power consumption		approx. 12 W
	Fuse		100-120 V AC: T 250 mA, H 250 V
			220-240 V AC: T 125 mA, H 250 V