EURODESK SX3242FX/SX2442FX
1. Introduction
Congratulations! With the EURODESK you have acquired a state-
BEHRINGER is a company with its roots in professional recording studio technology. For many years now we have been successful in developing products for studio and live use. These include microphones and studio gear of all kinds (compressors, enhancers, noise gates, tube processors, headphone amplifiers, digital effects, DI boxes, etc.), monitor and P.A. speakers as well as professional live and recording mixers. Our entire technical
FBQ Feedback Detection System
One of the most outstanding features of this console is the FBQ Feedback Detection System, which is part of the graphic equalizer. This ingenious circuit makes it possible to detect and subsequently eliminate feedback frequencies very quickly. FBQ
increases the brightness of the EQ fader LEDs for the frequency bands where feedback is occurring. What used to be a tedious search for feedback frequencies is now mere child’s play.
XENYX Mic Preamps
The microphone channels feature
== 130 dB dynamic range for an incredible amount of headroom
== A bandwidth ranging from below 10 Hz to over 200 kHz for
== The extremely
== They are perfectly matched to every conceivable microphone with up to 60 dB gain and +48 volt phantom power supply
== They enable you to use the greatly extended dynamic range of your
“British EQ”
The equalizers used for the XENYX Series are based on the legendary circuitry of
What is more, the EURODESK comes with two ef-
fects processors using
ers and the effects algorithms of our renowned 19"
simulations, delay and modulation effects as well as compressor, tube distortion and numerous other effects
The mixer is equipped with a
terms of power consumption than standard power supply units.
1.1Before you get started
1.1.1 Shipment
Your product was carefully packed at the factory to ensure safe transport. Nevertheless, if the box is damaged inspect the unit immediately for signs of damage.
++ If the unit is damaged please do NOT return it to us, but notify your dealer and the shipping company im- mediately; otherwise, claims for damage or replacement may not be granted.
++ We recommend that you use a flight case to give the unit optimum protection during use or transport.
++ Always use the original box to prevent damage during storage or transport.
++ Make sure that children cannot play unsupervised with the unit or its packaging.
++ Please ensure proper disposal of all packing materials.
1.1.2 Initial operation
Ensure adequate air supply and to avoid overheating do not place the unit near radiators etc.
++ Blown fuses must be replaced by fuses of the correct rating! Please refer to the “Specifications” section for the applicable rating.
For connection to the mains use the enclosed power cord with cold connector which complies with the relevant safety regulations.
++ Please make sure that all devices are properly grounded.
For your own safety, never remove or disable the ground conductors from the devices or on the power cords. The unit must always be connected to the mains outlet with a protective grounding connection.
++ We would like to point out that high volume levels may damage your hearing and/or your headphones/ loudspeakers. To avoid
Important notes concerning installation
++ The sound quality may diminish within the range of powerful broadcasting stations and
1.1.3 Online Registration
Please register your new BEHRINGER equipment right after your purchase by visiting http://www.behringer.com and read the terms and conditions of our warranty carefully.
Should your BEHRINGER product malfunction, it is our intention to have it repaired as quickly as possible. To arrange for warranty service, please contact the BEHRINGER retailer from whom the equipment was purchased. Should your BEHRINGER dealer not be located in your vicinity, you may directly contact one of our subsidiaries. Corresponding contact information is included in the original equipment packaging (Global Contact Information/ European Contact Information). Should your country not be listed, please contact the distributor nearest you. A list of distributors can be found in the support area of our website (http://www. behringer.com).
Registering your purchase and equipment with us helps us process your repair claims more quickly and efficiently.
Thank you for your cooperation!
4 | Introduction |