14EURODESK SX4882 User Manual

Auxiliary returns

All six stereo pairs, to be located immediately below the aux sends, are on unbalanced 1/4" jacks and operate at 0 dBu.

Fig. 7.3: Auxiliary returns

Subgroup inserts

Unbalanced send and return from a single stereo jack socket, wired tip = out, ring = in and sleeve = ground/screen.

Fig. 7.4: Subgroup inserts

Main inserts

As above, but for the main mix.

Stereo outputs

The control room output (monitors) main mix, MIX-B and studio output are all on a pair of unbalanced 1/4" jacks, nominal output level +4 dBu. The main mix is also available as a fully balanced pair.

Phones 1/2

These are on stereo jacks, wired tip = left signal, ring = right signal and sleeve = ground/screen (see section 6.4 “Headphones”).

Meter/analyzer out

Unbalanced jacks at +4 dBu for use with external measuring equipment,

e.g. the built-in real-time analyzer of our BEHRINGER ULTRACURVE PRO DEQ2496 (signal = master LED meters).

Master balanced outputs

Balanced XLR for connecting to the mastering recorder. Wired pin 1 ground/ screen, pin 2 hot and pin 3 cold. Maximum level is +28 dBu.

2-track in/out

RCA sockets for use with tape recorders, etc., signal = main mix, wired center post = signal (+ve) and sleeve = ground/screen.

Fig. 7.5: 2-track in/out

2-track/external inputs

Two additional stereo inputs, this time on unbalanced 1/4" jacks, wired tip = signal (+ve) and sleeve = ground/screen.

Fig. 7.6: Additional connectors

Fig. 7.7: Main balanced outputs

Fig. 7.8: A and B-channel input section

behringer.com