6EURORACK UB1202FX/UB1002FX User Manual

◊Please always use the original packaging to avoid damage due to storage or shipping.

◊Never let unsupervised children play with the EURORACK or with its packaging.

◊Please dispose of all packaging materials in an environmentally-friendly fashion.

1.3.2 Initial operation

Be sure that there is enough space around the unit for cooling purposes and to avoid overheating please do not place your mixing console on high-temperature

2. Control Elements and Connectors

this chapter describes the various control elements of your mixing console. All controls, switches and connectors will be discussed in detail.

2.1 Mono channels

1

MIC

LINE

BAL

IN

equipment such as radiators or power amps.

◊Never connect the EURORACK to the power supply unit when the latter is connected to the mains! First connect the power supply unit to the console, then connect the power supply unit to the mains.

◊Please make sure that all units have a proper ground connection. For your own safety, never remove or disable the ground conductor from the unit or on the AC power cord. The unit should always be connected to a mains socket outlet with a protective earthing connection.

◊When installing the product, ensure the appliance coupler or power cord is easily accessible for disconnecting the unit from mains.

1.3.3 Online registration

Please register your new BEHRINGER equipment right after your purchase by visiting http://behringer.com and read the terms and conditions of our warranty carefully.

Should your BEHRINGER product malfunction, it is our intention to have it repaired as quickly as possible. To arrange for warranty service, please contact the BEHRINGER retailer from whom the equipment was purchased. Should your BEHRINGER dealer not be located in your vicinity, you may directly contact one of our subsidiaries. Corresponding contact information is included in the original equipment packaging (Global Contact Information/European Contact Information). Should your country not be listed, please contact the distributor nearest you. A list of distributors can be found in the support area of our website (http://behringer.com).

Registering your purchase and equipment with us helps us process your repair claims more quickly and efficiently.

Thank you for your cooperation!

OR

UNBAL

GAIN

+10 – 10 +40 +60

0EQ

HIGH

12 kHz

–15 +15

0

MID

2.5 kHz

–15 +15

0

LOW

80Hz

–15 +15

LOW CUT

0

+15

PAN

CLIP

L R

0

L EVEL

+15

1

Fig. 2.1: Connectors and controls on the mono channels

MIC

Each mono input channel offers a balanced microphone input via the XLR connector and also features a switchable +48 V phantom power supply for condenser microphones.

◊Please mute your playback system before you activate the phantom power supply to prevent switch-on thumps being directed to your loudspeakers. Please also note the instructions in chapter 2.4 “Main section”.

LINE IN

Each mono input also features a balanced line input on a 1/4" connector. Unbalanced devices (mono connectors) can also be connected to these inputs.

◊Please remember that you can only use either the microphone or the line input of a channel at any one time. You can never use both simultaneously!