11U-CONTROL UCA202 User Manual

Use the jack to connect a standard pair of headphones equipped with a 1/8" TRS connector.

The VOLUME control adjusts the volume level of the headphones output. Turn the control fully to the left before you connect the headphones. This helps you avoid the damage that is caused by high volume settings.

3.2 Rear panel

[5]

[6]

[7]

Fig. 3.2: back of the UCA202

Use the LINE-OUT jacks for audio cables with RCA connectors.

Use the LINE-IN jacks for audio cables with RCA connectors.

The OFF/ON-MONITOR switch activates the monitor function. In this case the input signal is routed directly to the headphones output.

behringer.com