GUITAR LINK UCG102
You can connect the guitar to your computer via USB connection. The blue control LED ( 
) indicates that a connection to the computer has been established.
The VOLUME control adjusts the volume level of the headphones output. Turn the control fully to the left before you connect the headphones. This helps you avoid the damage that is caused by high volume settings.
You can use a commercially available ¼" jack for the 
-connection.
We would like to draw your attention to the fact that extremely loud sound levels may damage your hearing as well as your headphones/loudspeakers. Turn the VOLUME control fully clockwise before you switch on the unit. Be careful to select a suitable volume at all times.
You can connect the UCG102 to your guitar via the guitar input (¼" jack). Use a commercial ¼" mono jack cable.
You can modify the guitar signal with the LEVEL switch. At high signal levels, the CLIP LED (above the BEHRINGER LOGO) will light up red in which case you should set the LEVEL switch to LOW.
The blue LED indicates the status of the USB connection.
2 CONTROLS AND CONNECTIONS | 11 |