ULTRALINK UL2000M
are shown in the display again.
Deactivating LOCK
1.Press the SET button. LOC ON is shown in the display.
2. Press the UP or DOWN button once to select LOCOFF.
3.Press the SET button confirm, hence deactivating the keylock function. The procedure is now over, and the basic settings are shown in the display again.
2.2.7 PRESET
The ULR2000 lets you work with 4 presets, each with 8 channels.
Factory presets (Presets 2, 3 and 4)
In the ULR2000, there are 3 factory presets (each with 8
The channels in the 3 factory presets are all assigned to different frequencies. This way, you can always select a frequency range that assures the best signal transmission.
The following table shows which frequencies are stored in the factory presets.
CHANNEL | PRESET 2 | PRESET 3 | PRESET 4 |
1 | 798,700 MHz | 798,400 MHz | 798,100 MHz |
2 | 799,950 MHz | 798,950 MHz | 798,650 MHz |
3 | 800,650 MHz | 799,800 MHz | 799,500 MHz |
|
|
|
|
4 | 801,050 MHz | 801,450 MHz | 801,150 MHz |
5 | 802,850 MHz | 803,250 MHz | 802,950 MHz |
|
|
|
|
6 | 804,500 MHz | 803,650 MHz | 803,350 MHz |
7 | 805,350 MHz | 804,350 MHz | 804,050 MHz |
8 | 805,900 MHz | 805,600 MHz | 805,300 MHz |
Table 2.1: Factory preset frequencies (presets 2,3 and 4)
User preset (Preset 1)
Preset 1 is meant for the user. Frequencies of your own choice can be stored in the 8 storage slots of this preset.
If you have not stored any of your own frequencies, the frequencies stored in the user preset (Preset 1) are identical to the frequencies stored in Preset 3.
Loading a preset
1.Press the SET button to get to the menu.
2. Press the DOWN button once to get to PRESET.
3.Press the SET button again to get to the PRESET submenu. The display shows the currently active preset.
4. Press the UP and DOWN buttons to select the desired preset. The display shows PSET 1 (2, 3 or 4).
5.Press the SET button to load up the preset you selected. The procedure is now over, and the basic setting is shown in the display again.
2. ULR2000 RECEIVER | 11 |