Behringer ULTRAWAVE B300 manual Detailed Safety Instructions

ULTRAWAVE B300

SAFETY INSTRUCTIONS

CAUTION:	To reduce the risk of electrical shock, do not remove the cover
	(or back). No user serviceable parts inside; refer servicing to
	qualified personnel.
WARNING:	To reduce the risk of fire or electrical shock, do not expose this
	appliance to rain or moisture.
	This symbol, wherever it appears, alerts you
	to the presence of uninsulated dangerous
	voltage inside the enclosure – voltage that may
	be sufficient to constitute a risk of shock.

This symbol, wherever it appears, alerts you to important operating and maintenance instructions in the accompanying literature. Read the manual.

DETAILED SAFETY INSTRUCTIONS:

All the safety and operation instructions should be read before the appliance is operated. Retain Instructions:

The safety and operating instructions should be retained for future reference. Heed Warnings:

All warnings on the appliance and in the operating instructions should be adhered to. Follow instructions:

All operation and user instructions should be followed. Water and Moisture:

The appliance should not be used near water (e.g. near a bathtub, washbowl, kitchen sink, laundry tub, in a wet basement, or near a swimming pool etc.).

Ventilation:

The appliance should be situated so that its location or position does not interfere with its proper ventilaton. For example, the appliance should not be situated on a bed, sofa rug, or similar surface that may block the ventilation openings: or placed in a built-in installation, such as a bookcase or cabinet that may impede the flow of air through the ventilation openings.

Heat:

The appliance should be situated away from heat sources such as radiators, heat registers, stoves, or other appliances (including amplifiers) that produce heat.

Power Source:

The appliance should be connected to a power supply only of the type described in the operating instructions or as marked on the appliance.

Grounding or Polarization:

Precautions should be taken so that the grounding or polarization means of an appliance is not defeated. Power-Cord Protection:

Power supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords and plugs, convenience receptacles and the point where they exit from the appliance. Cleaning:

The appliance should be cleaned only as recommended by the manufacturer. Non-use Periods:

The power cord of the appliance should be unplugged from the outlet when left unused for a long period of time. Object and Liquid Entry:

Care should be taken so that objects do not fall and liquids are not spilled into the enclosure through openings. Damage Requiring Service:

The appliance should be serviced by qualified service personnel when:

-the power supply cord or the plug has been damaged; or

-objects have fallen, or liquid has been spilled into the appliance; or

-the appliance has been exposed to rain; or

-the appliance does not appear to operate normally or exhibits a marked change in performance; or

-the appliance has been dropped, or the enclosure damaged.

Servicing:

The user should not attempt to service the appliance beyond that which is described in the Operating Instructions. All other servicing should be referred to qualified service personnel.

Caution! Please note the following instructions pertaining to the “flying” operation of your speaker cabinet:

The operation of your speaker cabinet as part of a flown system is at your own risk! Make sure that speaker cabinets are set up and “flown” by qualified personnel only, using dedicated equipment and the original parts and components delivered with the unit. Be sure to observe the local safety regulations applicable in your country. BEHRINGER company (BEHRINGER Spezielle Studiotechnik GmbH including the BEHRINGER companies listed on the enclosed “Service Information” sheet) assumes no liability for any damage or personal injury resulting from improper use or operation of the product!

Check the speaker cabinet for damages before using it as part of a flown system. If you detect any cracks, deformations, corrosion, defective or missing parts, the speaker cabinet may not be used! If the hanging fixtures show any signs of damage, they must be replaced immediately!

The speaker cabinet was designed exclusively to carry its own weight when operated as part of a flown system. Please note that it is not permitted to attach any additional weights or charges to the speaker cabinet!

Make sure that the speaker cabinet is not exposed to moisture during outdoor use, and that it cannot be “shaken” by gusts of wind. Check the floor:

Always check the floor for stability before you set up the speaker cabinet. Vibrating floors (e.g. elements/components on the stage) do not provide reliable support for speaker stacks. So, always set up your speakers on a solid and even support.

Make sure that speaker cabinets are set up properly:

Set up your speaker cabinet at a distance to dance floors or other audience areas, so as to avoid that somebody can knock over a speaker stack.

2