U-CONTROL UMX25

4)Confirm your selection with . To discard your

assignments either press the button or the ASSIGN button again.

Pressing the right-hand OCTAVE SHIFT button switches the presets up by one number on the external sound module, pressing the left-hand OCTAVE SHIFT button switches the presets down by one number. Pressing both buttons simultaneously switches back to preset 0 in the current bank.

Remember to assign the OCTAVE SHIFT buttons to an individual MIDI channel if you do not want to use the GLOBAL CHANNEL (see Chapter 4.2.2).

When using the stepwise search function, the channel assignment involves both buttons. Assigning an individual channel to one of the two buttons is not supported.

c) Various controller functions:

Please note that the OCTAVE SHIFT buttons generate switch controller information if assigned to a controller. They always generate a value of 0 or 127.

Two exceptions: If you assign the OCTAVE SHIFT buttons to controller CC 07 (Channel Volume), pressing either of the two buttons generates the value 0. With controller CC 10 (Panorama), the value generated by pressing either of the buttons is 64.

Please note that when a controller has been assigned, pressing both buttons simultaneously has no effect.

1)Press the ASSIGN button and keep it pressed.

2)Press the one of the two OCTAVE SHIFT buttons to which you want to assign a controller.

3)Release the ASSIGN button.

4)Press the number keys on the keyboard to enter the controller number of your choice (as described in Chapter 4.2.1).

5)Confirm your selection with . To discard your

assignments either press thebutton or the ASSIGN button again. In either case the ASSIGN LED goes out.

Remember to assign the OCTAVE SHIFT buttons to an individual MIDI channel if you do not want to use the GLOBAL CHANNEL (see Chapter 4.2.2).

4.2.10 Velocity Sensitivity

The sensitivity of the UMX25 can be regulated so that the velocity of the keys has an effect on the volume level.

1)Press the ASSIGN button and keep it pressed.

2)Use the number keys to enter the keyboard velocity (see Table 4.1).

3)Release the ASSIGN button.

4)Confirm your selection with . To discard your

assignments either press thebutton or the ASSIGN button again.

KEY

EFFECT ON KEY VELOCITY

 

OFF: velocity value is fixed to 110.

 

Change of key pressure has no effect on

 

volume level.

 

SOFT: key pressure is very sensitive; low

 

velocity changes create high changes in

 

volume level

 

 

 

MEDIUM: key pressure is “normal”; (very)

 

hard hit notes are (very) loud, (very) soft

 

hit notes produce (very) low volume

 

 

 

HARD: key pressure is more unsusceptible

 

compared to all other settings

 

 

bis

invalid input

 

 

Table 4.1: Effect of RANGE definition on keyboard velocity

4.2.11 The FACTORY RESET command

Please proceed as follows to reset all UMX25 settings to their factory defaults:

1)Press the ASSIGN button and keep it pressed.

2a) Press both OCTAVE SHIFT buttons for a temporary FACTORY RESET. All currently modified control elements will be reset to their factory defaults. However, the USER MEMORY remains as before and is not reset!

2b) Press keys , and simultaneously for a complete FACTORY RESET: Now not only the control elements of the FACTORY MEMORY but also those of the USER MEMORY will be overwritten.

3)Release the ASSIGN button. The ASSIGN LED stays on.

4)Confirm your selection with . If you do not want to

RESET the unit, either press the button or the ASSIGN button again.

12

4. OPERATION