V-AMP3

Balanced stereo Line output can be configured for many recording and live applications

Page 2 of 5

Laptop

UCA222

V-AMP3

HPS3000

 

USB Audio Interface

 

 

Top tone—in full effect

Stunning in the studio

Adjustable auto-chromatic tuner plus effective global configurations and equalization easily adapts the V-AMP 3 to any situation outside your home studio

MIDI implementation includes program changes, control changes and SysEx, allowing complete MIDI remote control or automation with your energyXT2.5 or other DAW

High-quality components and exceptionally rugged construction ensure long life

Conceived and designed by

BEHRINGER Germany

The V-AMP 3 gives you flanger, chorus, compression, delay and 12 other beautiful digital effects to apply to your sound.

Adjust the effect’s level in the mix via the EFFECTS dial. To adjust effect parameters, you can rhythmically press the TAP button to alter delay times or LFO speeds, or hold down the TAP button and twist the EFFECTS knob to access e.g. feedback or depth. By using a MIDI pedal, such as the BEHRINGER FCB1010, you can access an additional Wah Wah effect. You can adjust the filter characteristic by entering EDIT mode, selecting the DRIVE menu and turning the EFFECTS knob while holding the TAP button.

Presenting the presets

All of these elements have been combined into 125 different presets divided into 25 banks, accessible through the BANK UP/BANK DOWN buttons. Within each bank, you can press buttons A through E to explore its different presets. You can also create and save your own presets. Start by selecting a preset, then making any changes you wish: amp, EQ, effect, etc. The preset LED will begin to flash, indicating that the V-AMP 3 is ready to save your settings. To do this, hold

the preset button down for about two seconds. Once the LED stops flashing, you have saved the modified preset.

On top of all this, the V-AMP 3 also features a built-in tuner and noise gate. In essence, it’s a Swiss Army Knife for the home recording enthusiast or gigging guitarist who can’t seem to settle on one amp.

The V-AMP 3 features several configurations that make it an invaluable asset in the studio. Access the configuration menu by pressing the B and D buttons at the same time. Then use BANK UP and BANK DOWN to select a configuration.

When using headphones, the V-AMP 3 will switch into Studio Mode 1 (S1). This stereo mode works well for both monitoring and recording with effects, amp and speaker modeling. It doesn’t apply the additional three-band EQ to the signal, but most recording programs—like energyXT2.5— have their own EQ.

In Studio Mode 2 (S2), the V-AMP 3 sends a signal with amp and speaker simulation, but only the right output has effects. You can either record both left and right outputs to separate tracks, or record the ”dry“ left output while monitoring the right output.

Stellar on stage

The V-AMP 3 has three live configurations. When performing live with this device, you can either run it to an amp on stage, run directly to the mixing board, or both. Live Mode 1 is the best choice for running the outputs directly to the mixer, because it applies amp and speaker simulation, effects and an additional 3-band EQ.

Continued on next page

Page 2
Image 2
Behringer V-Amp3 manual Top tone-in full effect, Presenting the presets, Stellar on stage, AMP3

V-Amp3 specifications

The Behringer V-Amp3 is a versatile multi-effects processor and amp simulator designed to provide musicians and audio enthusiasts with a wide range of tonal possibilities and effects at an affordable price. It caters primarily to guitarists but can also be utilized by bass players and other instruments, making it a highly sought-after tool for live performances and studio recordings.

One of the standout features of the V-Amp3 is its extensive selection of amp models. The unit emulates numerous famous amplifiers, allowing users to create their signature sound by selecting from a range of iconic tones. With models ranging from vintage tube amps to modern high-gain machines, guitarists can easily achieve everything from warm, clean tones to heavy, distorted sounds. The V-Amp3 inherits Behringer's legacy of quality sound processing while offering an intuitive interface that invites experimentation.

The device is equipped with a collection of built-in effects, including reverb, delay, chorus, flanger, and more. This variety allows users to layer different effects and create complex soundscapes without the need for additional pedals. Each effect can be easily fine-tuned using dedicated parameters, providing musicians with precise control over their sound.

The V-Amp3 also features an integrated expression pedal, which allows players to manipulate effects in real time. This is particularly useful for dynamic performances where on-the-fly adjustments can enhance the overall experience. Additionally, the unit includes a built-in tuner and a metronome, making it a convenient all-in-one solution for practice and performance.

In terms of connectivity, the V-Amp3 is designed with flexibility in mind. It includes a headphone output for silent practice, as well as stereo outputs for connecting to an amplifier or PA system. The unit can also interface with a computer via USB, facilitating easy recording and integration into a digital audio workstation.

With its combination of advanced modeling technology, user-friendly design, and comprehensive effects, the Behringer V-Amp3 stands out as an impressive tool for musicians at all levels. Its affordable price point, combined with its robust feature set, makes it an excellent investment for anyone looking to expand their sound palette while maintaining high-quality audio performance. The V-Amp3 embodies Behringer's commitment to innovation in the music industry, proving that professional-grade equipment doesn't have to come with a hefty price tag.