PRO MIXER VMX200

35FUSE HOLDER/VOLTAGE SELECTOR. Before you connect the equipment to an AC outlet, please be sure that the voltage displayed corresponds with your local AC voltage. If you should need to replace the fuse, be sure to replace it with one of the same type and value. Some units allow you to switch between 230 V and 115 V by rotating the fuse holder.

+

36

Note: To operate the unit at 115 V, you must install a fuse with the double ampere rating.

This is the socket for the power cable. The impulse behavior of any given amplifier circuit depends largely upon the power supply’s inherent reserves. All mixers contain numerous operational amplifiers (op-amps) for processing line-level signals. Due to the restricted performance of their power supplies, many mixers show “stress symptoms” when used under extreme conditions, resulting in inferior audio quality. Thanks to its generously proportioned power supply, this will never happen to your VMX200: The sound will always be clear, transparent and powerful.

37SERIAL NUMBER. Please take the time to fill out and return the warranty card within 14 days after the date of purchase. This will entitle you to all the benefits of our extended warranty. Alternatively, you can register online at www.behringer.com.

10

3. REAR PANEL