Behringer VT100FX/VT50FX, VT100FXH, VT250FX 4.Installation, tip, sleeve ring tip, strain relief clamp, Balanced ¼" TRS connector, Unbalanced ¼" TS connector

9VIRTUBE VT250FX/VT100FX/VT50FX/VT100FXH User Manual

4.Installation

Except for the headphones output and the CD IN input (1/4" TRS connectors),

all audio inputs and outputs on the BEHRINGER VIRTUBE are on 1/4" TS connectors. Please see Chapter 5, “Specifications” for more information.

◊Please ensure that the unit is installed and operated only by people qualified to do so. During installation and operation the user must have sufficient electrical contact to earth. Electrostatic discharge may affect the operation of the unit.

Unbalanced ¼" TS connector

strain relief clamp sleeve

tip

		R
		L
	tip
ring	sleeve	R
sleeve
	sleeve	L
tip
	tip

Fig. 4.3: Stereo adapter cable

sleeve	sleeve
tip	tip

Fig. 4.4: Mono adapter cable

sleeve (ground/shield)

tip

(signal)

Fig. 4.1: 1/4" TS connector

Balanced ¼" TRS connector strain relief clampsleeve ring tip

sleeve ground/shield

ring cold (-ve)

tip

hot (+ve)

For connection of balanced and unbalanced plugs, ring and sleeve have to be bridged at the stereo plug.

Fig. 4.2: 1/4" TRS connector