
XENYX X2442USB X2222USB / X1832USB X1622USB / X1222USB X1204USB / 1204USB
X1832USB
Building on the feature set of the X1622USB, the X1832USB comes with two additional mic strips (including channel inserts), for a total of six XENYX mic preamps. The onboard stereo
Page 11 of 17
in conjunction with the FBQ feedback detection circuitry to eliminate annoying mic squeals. Other features include
The
XLR mic input with XENYX preamp
¼" balanced/ unbalanced input
Gain control adjusts input signal level
Compressor knob adjusts compression effect on channel
Mid level ±15 dB, variable center frequency
Mid Frequency, variable 100 Hz
– 8 kHz
Low EQ ±15 dB, centered @ 80 Hz
Aux Sends for Monitors (1 x pre, 1 x pre/ post selectable) and FX (post)
Pan control adjusts position of signal in stereo image
Mute & Clip LEDs
Solo & Sub/ Main assignment switches
Low Cut filter removes unwanted infrasonics
High EQ ±15 dB, centered @ 12 kHz
Mute switch removes signal from Main Mix
Channel fader adjusts signal level in Main Mix
X1832USB Front Panel
| Onboard FX | |
FX Send | processor, | |
16 presets, | ||
control | ||
two parameter | ||
| ||
| controls | |
| ||
EQ with FBQ |
| |
Feedback |
| |
Detection and |
| |
assignment |
| |
switches |
| |
XPQ 3D level | Phones/CTRL | |
Room source | ||
and assignment | ||
mixing matrix | ||
switch | ||
| ||
Aux 1 send | Phones/CTRL | |
control | ||
Room level | ||
| ||
| control | |
| ||
| meter with | |
Stereo Aux 1 | +48 V and | |
Return level | Power LEDs | |
Voice |
| |
Canceller |
| |
switch |
|
Monitor Send | FX/Aux 2 | Sub | Main Mix |
level fader | Return level | faders | faders |
| fader |
|
|