Behringer Xenyx +

XENYX 502/802/1002/1202

AC POWER IN

Connect the power supply to the 3-pin mains connector on the

rear of the console. Use the AC adapter supplied to connect the

console to the mains. The adapter complies with all applicable

safety standards.

+Please use only the power supply unit provided

with the console.

+Never connect the XENYX to the power supply unit

while the latter is connected to the mains! First

connect the console to the power supply unit, then

connect the power supply unit to the mains.

+Please note that both the power supply unit and

the mixing console heat up considerably during

operation. This is completely normal.

You will need a large number of cables for different

applications. The illustrations below show how the connectors

should be wired. Be sure to use only high-grade cables.

Please use commercial RCA cables to connect the 2-track

inputs and outputs.

You can, of course, also connect unbalanced devices to the

balanced inputs/outputs. To do this, use either mono plugs or

stereo plugs with the ring and sleeve bridged (pins 1 and 3 in the

case of XLR connectors).

+Caution! Never use unbalanced XLR connectors

(PIN 1 and 3 connected) on the MIC input connectors

when using the phantom power supply.

Fig. 3.1: XLR connections