7
XENYX 502/802/1002/1202
FX
The FX sends of the stereo channels function similar to those
of the mono channels. However, since the FX send buses are
both mono, a mono sum is first taken from the stereo input before
it is sent to the FX bus. The 502 is not equipped with FXsends.
BAL
The BAL(ANCE) control determines the levels of left and right
input signals relative to each other before both signals are then
routed to the main stereo mix bus. If a channel is operated in
mono via the left line input, this control has the same function as
the PAN control used in the mono channels.
LEVEL
The LEVEL control determines the volume of the channel being
sent to the main mix.
+4/-10
The stereo inputs of the XENYX 1002 and 1202 have an input
sensitivity switch which selects between +4 dBu and -10 dBV.
At -10dBV (home-recording level), the input is more sensitive
(requires less level to drive it) than at +4 dBu (studio level).
2.3 Connector panel and main section