ADDITIONAL INFORMATION
Please note that Encrypted channels may not be stored after scanning in the Digital TV channels. If this is the case then you will need to rescan the channels again but this time change the LIST SCRAMBLED CHANNELS from AUTO to ON:
1Press Menu.
2Select Features.
3Select Digital Features.
4Select User Interface Options.
5List Scrambled Channels will show.
Change “Auto” setting to “ON”
6Press Exit button to exit the Menu.
You will need to rescan the digital TV channels:
1Press Menu.
2Select Setup.
3Select Auto Tuning and press the OK button to start the channel scan and this time store the Scrambled channels.
6.3.2-Manual tuning of channels and storing in the memory
Press MENU button in digital mode and MAIN MENU will be displayed. Select SETUP tab with Down
movement button and confirm with the OK button. SETUP menu will
be displayed. Select MANUAL TUNING tab and confirm by
pressing the OK button. Manual Search Parameters menu will be displayed.
Manual Search Parameters |
|
Channel | 21 |
Frequency | 474000 |
Update of Channel List | Add channels |
|
|
Change | Start | Back |
Highlight the Channel tab by means of Up/Down buttons and directly enter the frequency number
of the channel you want to search, if you know, by using the numeric keys on the remote control. If you don’t know the frequency number, you can scan frequencies by using the Left/Right movement buttons.
After entering the frequency you want to search, highlight Update of
Channel List tab with Up/Down movement buttons and select either one of Add channels, Replace channels or Erase channel list items, then press OK button to start searching. Channels will be searched or changed according to the search method you have chosen.
Channel Search
Waiting for signal...
Service found: |
|
|
TV: 0 | Radio: 0 | Other: 0 |
|
| Stop Search |
Add Channels : With this option, the new channels in the frequency which is desired to be manually searched will be scanned and added to the existing channel list.
Replace Channels : With this option, you can update the existing channel list with the modifications made by the broadcasting enterprise.
Erase Channel List : With this option, you can delete all channels in the existing channel list to store only the new channels in the desired frequency into the memory.
Note: You can also access Manuel Tuning menu from the System Menu submenu under Digital Features menu.
6.3.3-First Time Installation
If you select this function, all channel information in the memory will be deleted. The OSD where country selection shall be made is displayed and channel search is made automatically. First, digital channels are searched. You can start Analog channel search by pressing the OK button after the digital channel search is completed.
12
