3Directions for Assembly
Safety notes for installation
Prior to installing and using your appliance, please check it for possible transit damage.
If the appliance is damaged, please contact your supplier.
Never install or use a damaged appliance.
The following directions must be followed to connect the dishwasher properly.
•Before operating your dishwasher, please ensure that the information on the type plate corresponds to the current and voltage of your power supply.
•The appliance may only be connected using a properly grounded socket. Ensure that the appliance is grounded according to regulations.
•The grounded socket must be easily accessible and close to the appliance.
•Do not use extension cables or multiple adapters, as this can lead to overheating, which can be a fire hazard.
•Hardwiring may only be carried out by a qualified electrician.
•Check the power cable, the water inlet hose and the drainage hose. Damaged parts may only be replaced by customer service personnel or by a qualified electrical service expert.
Installing Your Dishwasher
•Choose a suitable location for your dishwasher. Take care to ensure that the appliance is stable on a level surface.
•Unevenness in the floor can be equalised by adjusting the screw feet. When the appliance is standing correctly, the door can be closed without difficulty.
•Water inlet and drainage hoses must be positioned so that they can move freely without bending or squeezing.
•The appliance may not be installed in a room where the temperature is below 0° Celsius.
GB