Installation
• The specified voltage must be equal to your mains voltage.
• Do not make connections via extension cables or
B WARNING: Damaged power cable must
be replaced by the Authorised Service Agents.
B WARNING: If the product has a failure, it should not be operated unless it is
repaired by the Authorised Service Agent! There is the risk of electric shock!
3.3. Electrical connection
Connect the product to a grounded outlet protected by a fuse complying with the values in the rating plate. Our company shall not be liable for any damages that will arise when the product is used without grounding in accordance with the local regulations.
•Electrical connection must comply with national regulations.
•Power cable plug must be within easy reach after installation.
•The voltage and allowed fuse or breaker protection are specified in the Rating Plate which is affixed to interior of the product. If the current value of the fuse or breaker in the house does not comply with the value in the rating plate, have a qualified electrician install a suitable fuse.
3.4. Adjusting the feet
If the product stands unbalanced after installation adjust the feet. Taking help from someone to slightly lift the refrigerator will facilitate this process.
B WARNING: First unplug the product. Product must not be plugged in when adjusting the feet. There is the risk of electric shock!
Turn the front feet to balance the product. The corner where the foot exists is lowered when you turn in the direction of arrow and raised when you turn it in the opposite direction.
3.5. Illumination lamp
Do not attempt to repair yourself but call the Authorised Service Agent if the LED illumination lamps do not go on or are out of order.
8 / 27 EN
Refrigerator / User Manual
