2.
Press the OK button, the display shows PIN?
3.
Key in your PIN number and press the OK button, then UP/DOWN button to the
location MAST PIN?
4.
Press OK button, the display shows PIN?, Key in the original PIN number(default
PIN:0000)
5.
Repeat the step 4 and the display shows MAST PIN
6.
Press OK button, the display shows PIN?, Key in the new PIN number,
7.
Repeat the step 6, and press OK button to confirm
PABX
With the PABX function, the phone will automatically pause once the initial string of the
phone number matches the PABX code. For example, if the user program to enter “9” as
PABX code, then when he dials “98118118”, then the phone will dial “9” first then pause
follow by “8118118”.
To set PABX number:
1.
Press MENU button, then press UP/DOWN button to the location BASE SET;
2.
Press the OK button, the display shows PIN?;
3.
Key in your PIN number and press the OK button, then UP/DOWN button to the
location PABX?;
4.
Press the OK button, the display shows PABX 1?. You may press UP/DOWN button
to select PABX 2
5.
Press the OK button, the display shows EMPTY. Key in the code. The maximum
PABX code length is 5 digits.
6.
Press OK button to confirm.
FLASH
With the FLASH function, you may select Short or Long flash time for your PABX. To set
FLASH:
To set flash time:
1.
Press MENU button, then press UP/DOWN button to the location BASE SET;
2.
Press the OK button, the display shows PIN? ;
3.
Key in your PIN number and press the OK button, then UP/DOWN button to the
location FLASH?;
4.
Press the OK button, the display shows SHORT? . You may press UP/DOWN button
to select LONG?
5.
Press the OK button to confirm.
Resetting the system
If you have set a PIN and forgotten it, you need to reset the system. The PIN will be reset to
0000. If you reset the system, you will lose all stored information (including numbers in
memory) and all features will return to their default settings. You need to register the handset
to the base unit again.
While you are resetting the system, you should disconnect the telephone line cord from the
back of the base unit, so you won't be interrupted by incoming calls. To reset the system
without the PIN: