47
Choosing a Startup Image
Turn the power on, and set the camera to the PLAYBACK mode
( page 13).
Open the menu.
y Press the MENU button, then use the four-way control to select S.Image
() and press the SET button.
Press or to select the image you want, then press the SET button to
apply the choice.
y A message “Completed” appears.
Set the camera to the Setup Menu ( pa ge 17).
Press or to select S.Image
() then press or the SET
button.
Press or to select a desired
option and press the SET button to
apply the setting.
[Off]: Disable the start-up image.
[System]: Use camera default image.
[My image]: Use the image that you just specified in step 3.
Press the MENU button to close the menu.
y The start-up image will not be deleted even if the original image is deleted or
memory formatted.
3
1
2
4
5
6
7
C
Ca
au
ut
ti
io
on
n