PROBLEM SOLVING/TROUBLE SHOOTING
∙If the appliance does not operate when switched on, check;
∙The plug is inserted properly in the socket and that the power supply is on. (To check the power supply to the socket, plug in another appliance)
∙The fuse has blown / circuit breaker has tripped / main distribution switch has been turned off.
∙The temperature control has been set correctly.
∙New plug is wired correctly if you have changed the fitted moulded plug. If the appliance is still not operating after the above checks, please refer to the section on “How To Obtain Service”.
Please ensure that above checks have been made as a charge will be made if no fault is found.
REPLACING THE INTERIOR LIGHT BULB
If the lamp burns out, disconnect the appliance from the mains. Take out the lamp trim. Make sure the lamp is screwed correctly. Plug in the appliance again. If the lamp still does not go on, replace it with another one model
10
