Beko CFD6643 manual Makesurethatsufficientroomisprovided

3.Make￿sure￿that￿sufficient￿room￿is￿provided

around￿the￿appliance￿to￿ensure￿free￿air

circulation.

Fit￿the￿two￿plastic￿wall￿spacer￿supplied

with￿the￿appliance￿rotating￿1/4￿turn￿to

the￿condenser￿at￿the￿back￿of￿the refrigerator￿(see￿diagram).

4.The￿fridge/freezer￿should￿be￿located￿on￿a smooth￿surface. The￿two￿front￿feet￿can￿be adjusted￿as￿required. To￿ensure￿that, your￿appliance￿is￿standing￿upright￿adjust the￿two￿front￿feet￿by￿turning￿clockwise￿or anti-clockwise,￿until￿the￿product￿is￿in firm￿contact￿with￿the￿floor.￿Correct adjustment￿of￿feet￿avoids￿excessive vibration￿and￿noise.

5.Refer￿to￿cleaning￿and￿care￿section￿to￿prepare

your￿appliance￿for￿use.

WARNING!

Do￿not￿connect￿your￿appliance￿to￿the￿electricity

supply￿until￿all￿the￿packing￿and￿transit￿protectors

have￿been￿removed￿including￿polystyrene￿block(s)

inserted￿between￿the￿compressor￿motor￿and the￿cabinet￿(see￿diagrams). Do￿not￿remove￿the￿plastic￿drain￿tray￿fitted￿above the￿compressor￿motor￿on￿models￿with auto￿-￿defrost￿fridge.

CONDENSER

SPACERS

COMPRESSOR

6.To￿take￿out￿the￿baskets￿from￿the￿freezer￿compartment￿please￿proceed￿as￿in￿item:

1

200

2

3

5